View 0206160000_4653961.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

124 sak-series
sak-series sak-series 125 w eidm?ller terminal - sak-series- are pro- ved in millions of applications for more than 50 years. a vailable for the two rail systems ts32 and ts35, the sak terminals are useable for every application and for all cross-sec- tions. sak terminals fulfill the requirements of en 60 947-7-1. thermosetting plastic or thermoplastic te rminal of thermosetting plastic are nor- mally used in applications where high con- tinuous service temperature and high flammability level are necessary. the w eidm?ller thermosetting plastic krg is very resistant against infection through mould and micro-organisms. the thermoplastic material polyamide 66 has very good electrical and mechanical properties upto 100 c. pa66 is flexible and unsusceptible to fracture, even with low temperatures. polyamid 66 has improved fire resistance and is self-extinguishing with flammability level v2 according to ul 94. cross-connection systems 40% of all terminals are cross-connected for potential branching. w eidm?ller distinguishes between the fol- lowing cross-connection units for sak- series: type q pre-assembled cross-connec- tions type ql permanent cross-connections type vl removeable cross-connection straps type qs removeable cross-connection plugs cross-connection systems from the sak and akz series, type q, ql or vl or other freely accessible live components, must be protected with appropriate covers adp 1 or 4 or tsk 31.5 as long as they are to be inserted safe from contact. approvals the following approvals apply to sak ter- minals: a ul-usa r csa-canada # gost-russia q sev-switzerland i kema-netherlands lr lloyds register of shipping u germanischer lloyd dnv det norske veritas sak portfolio feed-through terminals ? r otective conductor terminals fuse terminals ? isconnect-test terminals feed-through terminals with tab, solder, wi re w rap and termi point connections initiator terminals, actuator terminals stud terminals accessories an extensive assortment of accessories is available for weidm?ller sak terminals: partitions cover plates small partitions ? est plugs ? est adapters marking material ? r oss-connections and covers ts 32 thermosetting plastic thermoplastic ts 35 positioning of end plates or partitions between cross-connections operating voltage terminal width (in mm) 3 6 3 810 1 21822 125 v ~ ap 250 v ~ ap 380 v ~ ap ap 440 v ~ tw ap ap ap ap 500 v ~ tw tw ap ap ap 660 v ~ tw tw tw tw tw ap 750 v ~ tw tw tw tw tw ap in pa terminals small partitions (tsch) have to be used up to 380 v.
126 feed-through terminals mounting rails, end brackets, further marking material see ?ccessories 1 ) contact-proof with adp 4 cover profile (see section ?ccessories? 3 ) cat. no. 0279660000 , 0279680000 , 0380460000 2 ) not suitable for sst 3 safety pin and 0380480000 , 41 a for 6 mm 2 w w w y y dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data v ersion krg blue krg krs pa blue pa orange pa t erminal block with marking pa t erminal block without marking pa end plate (thickness mm) krg blue krg krs pa blue pa pa blue pa partition (thickness mm) tw wtw krg blue krg krs pa blue pa hp small partition tsch 1 cross-connection q 4 2-pole 3-pole 4-pole 10-pole cover plates switchable cross-connection link vl 2 bs vh marking tags print dek standard sakd 2.5 n sakd 2.5/10/35 sak 2.5/35 sak 2.5/10/35 sak 4/35 sak 4/10/35 sak 2.5 sak 2.5/10 a r # lr u 5/32.5/43.5 5/44/38 10/m 2.5/3.5 x 0.6 500 v/24 a/2.5 mm 2 6 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 2 30 a/4 mm 2 24 24 300 v/20 a/28?2 awg 300 v/20 a/22?2 awg y qty. w qty. 0215560000 10 0 0268860000 10 0 0215580000 10 0 0268880000 10 0 0401060000 10 0523160000 10 0401160000 10 t ype cat. no. qty. ap (1.5) 0150960000 20 ap (1.5) 0150980000 20 tw (1.5) 0191860000 20 tw (1.5) 0191880000 20 tw (1.5) 0307500000 20 tsch 3 0366860000 100 q 2 0367800000 50 q 3 0367900000 50 q 4 0368000000 50 q 10 0368100000 20 dek 5 see ?ccessories a r i # lr u 6/45/40 10/m 2.5/3.5 x 0.6 800 v/24 a/2.5 mm 2 8 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5/4 3 ) a 3 32 a/4 mm 2 32 600 v/20 a/22?2 awg 600 v/25 a/26?0 awg w cat. no. qty. 0380420000 100 0380470000 100 0380460000 1 )100 0380480000 1 )100 0499460000 1 )10 0499560000 1 )10 t ype cat. no. qty. ap (1.5) 0279520000 20 ap (1.5) 0279570000 20 ap (1.5) 0279530000 20 ap (1.5) 0460560000 20 ap (1.5) 0460580000 20 tw (2.5) 0302820000 20 tw (2.5) 0302870000 20 tw (2.5) 0302830000 20 tw (1.5) 0302860000 20 tw (1.5) 0302880000 20 tw (1.0) 0297100000 20 tsch 1 0319160000 100 q 2 0337000000 50 q 3 0337100000 50 q 4 0337200000 50 q 10 0368700000 20 ad 4 0303400000 50 bskm3x22 0128900000 100 dek 6 see ?ccessories? a r i # lr u dnv 6/36.5/46.5 10/m 2.5/3.5 x 0.6 800 v/24 a/2.5 mm 2 3) 8 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5/4 3 ) a 3 32 a/4 mm 2 32 600 v/20 a/22?2 awg 600 v/25 a/26?0 awg y cat. no. qty. 0279620000 100 0279670000 100 0279630000 100 0279660000 1 ) 2 )100 0279680000 1 ) 2 )100 1326360000 1 ) 2 )100 0322560000 1 ) 2 )10 0322860000 1 ) 2 )10 t ype cat. no. qty. ap (1.5) 0279520000 20 ap (1.5) 0279570000 20 ap (1.5) 0279530000 20 ap (1.5) 0279560000 20 ap (1.5) 0279580000 20 tw (2.5) 0302820000 20 tw (2.5) 0302870000 20 tw (2.5) 0302830000 20 tw (1.5) 0302860000 20 tw (1.5) 0302880000 20 tw (1.0) 0297100000 20 tsch 1 0319160000 100 q 2 0337000000 50 q 3 0337100000 50 q 4 0337200000 50 q 10 0368700000 20 ad 4 0303400000 50 bskm3x22 0128900000 100 dek 6 see ?ccessories? a r i # 6.5/40/51.5 6.5/45/44 12/m 3/3.5 x 0.6 800 v/32 a/4 mm 2 8 kv/3 0.5?.0 2 0.5? 0.5? 0.5? 0.5? a 4 41 a/6 mm 2 36 600 v/20 a/22?2 awg 600 v/36 a/26?0 awg w cat. no. qty. 0443620000 100 0443670000 100 0443660000 1 ) 100 0443680000 1 ) 100 1323660000 1 ) 100 0530460000 1 )10 0530360000 1 )10 t ype cat. no. qty. ap (1.5) 0117920000 20 ap (1.5) 0117970000 20 ap (1.5) 0117930000 20 ap (1.5) 0117960000 20 ap (1.5) 0117980000 20 tw (2.5) 0130120000 20 tw (2.5) 0103170000 20 tw (2.5) 0130130000 20 tw (1.5) 0130160000 20 tw (1.5) 0130180000 20 tw (1.0) 0197100000 20 tsch 1 0319160000 100 q 2 0336700000 50 q 3 0336800000 50 q 4 0336900000 50 q 10 0368800000 20 ad 4 0285300000 50 bsk m3x22 0128900000 100 vl 2 0197000000 100 vh 0285100000 50 bs 0292500000 100 dek 6.5 see ?ccessories?
feed-through terminals sak-series 127 y dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 w ith/without plastic insulating collar mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a t echnical data v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data v ersion krg blue krg krs pa blue pa orange pa t erminal block with marking pa t erminal block without marking pa end plate (thickness mm) krg blue krg krs pa blue pa pa blue pa partition (thickness mm) tw wtw krg blue krg krs pa blue pa hp small partition tsch 6 cross-connection q 4 qb 4 2-pole 3-pole 4-pole 10-pole 2-pole 3-pole 4-pole switchable cross-connection link vl 2 bs vh marking tags print dek standard * accepts ls 2.8 shield lugs cat. no. 1056400000 ** 2.5 mm 2 conductor connection when using qb mounting rails, end brackets, further marking material see ?ccessories 1 ) contact-proof cross-connec. with adp 4 over profile (see ?ccessories? 2 ) not suitable for fuse pin sst 3 y w a r i # lr u dnv 6.5/40/51.5 800 v/32 a/4 mm 2 8 kv/3 0.5?.0 2 0.5? 0.5? 0.5? 0.5? a 4 41 a/6 mm 2 36 600 v/20 a/22?2 awg 600 v/36 a/26?0 awg y cat. no. qty. 0128320000 100 0128370000 100 0128330000 100 0128360000 1 ) 2 ) 100 0128380000 1 ) 2 ) 100 0105060000 1 ) 2 ) 100 0322660000 1 ) 2 )10 0308860000 1 ) 2 )10 t ype cat. no. qty. ap (1.5) 0117920000 20 ap (1.5) 0117970000 20 ap (1.5) 0117930000 20 ap (1.5) 0117960000 20 ap (1.5) 0117980000 20 tw (2.5) 0130120000 20 tw (2.5) 0103170000 20 tw (2.5) 0130130000 20 tw (1.5) 0130160000 20 tw (1.5) 0130180000 20 tw (1.0) 0197100000 20 tsch 1 0319160000 100 q 2 0336700000 50 q 3 0336800000 50 q 4 0336900000 50 q 10 0368800000 20 vl 2 0197000000 100 vh 0285100000 50 bs 0292500000 100 dek 6.5 see ?ccessories a r # 6/54/60 6/54/60.5 9 /m 3/3.5 x 0.6 500 v/2 x 32 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 0.5? 0.5? 0.5? a 3 32 a/4 mm 2 32 32 300 v/27 a/22?2 awg 300 v/10 a/26?2 awg y qty. w qty. 0590060000 * 1 )100 0590160000 1 )100 0590080000 * 1 )100 0590180000 1 )100 1323860000 * 1 )10 t ype cat. no. qty. ap (1.5) 1397160000 20 ap (1.5) 1397180000 20 wtw (ex) 1058800000 20 tsch 6 0190260000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 qb 2 0482700000 **100 qb 3 0482800000 ** 50 qb 4 0482900000 ** 50 vl 2 0446700000 50 vh 1056500000 100 bs 0343100000 100 dek6 see ?ccessories a r # 6/54/60 6/54/60.5 9 /m 3/3.5 x 0.6 500 v/2 x 32 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 0.5? 0.5? 0.5? a 3 32 a/4 mm 2 32 32 300 v/27 a/22?2 awg 300 v/10 a/26?2 awg y qty. w qty. 0355460000 10 0 0527660000 10 0 0355480000 10 0 0527680000 10 0 t ype cat. no. qty. ap (1.5) 1397160000 20 ap (1.5) 1397180000 20 wtw (ex) 1058800000 20 tsch 6 0190260000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 qb 2 0482700000 **100 qb 3 0482800000 ** 50 qb 4 0482900000 ** 50 vl 2 0446700000 50 vh 1056500000 100 bs 0343100000 100 dek6 see ?ccessories dk 4 q* dkb4 q*/10* sak 4 sak 4/10 dk 4 dk4/35 y w
128 feed-through terminals mounting rails, end brackets, further marking material see ?ccessories * accepts ls 2.8 shield lugs cat. no. 1056400000 ** 2.5 mm 2 conductor connection when using qb y sak 6 n sak 6/10/35 sak 10 sak 10/10/35 sak 16 sak 16/35 dk4 qv* dk4 qv/35* w y w y w y w a r # 6/54/60 6/54/60.5 9 mm/m 3/3.5 x 0.6 500 v/32 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 0.5? 0.5? 0.5? a 3 32 a/4 mm 2 32 32 300 v/27 a/22?2 awg 300 v/10 a/26?2 awg y qty. w qty. 0590260000 * 1 )100 0363660000 * 1 )100 0590280000 * 1 )100 0363680000 * 1 )100 t ype cat. no. qty. ap (1.5) 1397160000 20 ap (1.5) 1397180000 20 wtw (ex) 1058800000 20 tw (2.0) 0607000000 20 tsch 6 0190260000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 qb 2 0482700000 ** 100 qb 3 0482800000 ** 50 qb 4 0482900000 ** 50 ad 4 0303400000 50 bsk m 2.5 x18 0303300000 100 vl 2 04467000000 50 vh 10565000000 100 bs 03431000000 100 dek 6 see ?ccessories? a r i # lr u dnv 8/40/51.5 8/45/44 12 mm/m 3.5/4.0 x 0.8 800 v/41 a/6 mm 2 8 kv/3 0.8?.6 3 0.5?0 0.5? 0.5?0 0.5? a 5 41 600 v/40 a/22? awg 600 v/47 a/20? awg y qty. w qty. 0193220000 10 0 0380520000 10 0 0380570000 10 0 019323 0000 10 0 0 193260000 1 )10 0 0380560000 1 )10 0 01 93280000 1 )10 0 0380580000 1 )100 0322760000 1 )10 0308960000 1 )10 t ype cat. no. qty. ap (1.5) 0117920000 20 ap (1.5) 0117970000 20 ap (1.5) 0117930000 20 ap (1.5) 0117960000 20 ap (1.5) 0117980000 20 tw (1.5) 0130120000 20 tw (1.5) 0130130000 20 tw (1.5) 0130160000 20 tw (1.5) 0130180000 20 tw (1.5) 0197100000 20 tsch 1 0319160000 100 q 2 0456700000 50 q 3 0456800000 50 q 4 0456900000 50 q 10 0457000000 20 ad 4 0196600000 50 bsk m 3x 22 0128900000 100 vl 2 0194700000 50 vh 0285100000 50 bs 0292500000 100 dek 8 see ?ccessories a r i # lr u dnv 10/40/51.5 10/45/44 12 mm/m 4/5.5 x 1.0 800 v/57 a/10 mm 2 8 kv/3 1.2...2.0 3 ) 4 1.5?0 2.5?6 1.5?0 1.5?0 b 6 76 a/16 mm 2 57 600 v/60 a/14? awg 3 ) 600 v/65 a/14? awg 3 ) y qty. w qty. 0110020000 100 0443720000 100 0110070000 100 0443770000 100 0110030000 100 0110060000 1 )100 0443760000 1 ) 100 0110080000 1 )100 0443780000 1 ) 100 0553860000 1 ) 10 0353160000 1 ) 10 t ype cat. no. qty. ap (1.5) 0117920000 20 ap (1.5) 0117970000 20 ap (1.5) 0117930000 20 ap (1.5) 0117960000 20 ap (1.5) 0117980000 20 tw (1.5) 0130120000 20 tw (1.5) 0130170000 20 tw (1.5) 0130130000 20 tw (1.5) 0130160000 20 tw (1.5) 0130180000 20 tw (1.5) 0197100000 20 tsch 1 0319160000 100 q 2 0457100000 50 q 3 0457200000 50 q 4 0457300000 50 q 10 0457400000 20 ad 4 0178600000 50 bsk m 3x 22 0128900000 100 vl 2 0135900000 50 vh 0285100000 50 bs 0292500000 100 dek 5 see ?ccessories? a r i # lr u dnv 12/50/57.5 12/50/50 15 mm/m 4/5.5 x 1.0 1000 v/76 a/16 mm 2 8 kv/3 1.2?.4 4 2.5?0 4?6 2 ) 4?6 4?6 b 6 76 600 v/80 a/12? awg 600 v/87 a/10? awg y qty. w qty. 0271020000 50 0380620000 50 0271030000 50 0271060000 1 )50 0380660000 1 )50 0271080000 1 )50 0380680000 1 )50 t ype cat no. qty. ap (3.0) 0271120000 20 ap (3.0) 0271130000 20 ap (1.5) 0271160000 20 ap (1.5) 0271180000 20 tw (3.0) 0281120000 20 tw (3.0) 0281130000 20 tw (1.5) 0303660000 10 tw (1.5) 0303680000 10 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2 0457500000 50 q 3 0457600000 50 q 4 0457700000 50 q 10 0457800000 20 ad 4 0518200000 50 bskm 3x22 0128900000 100 vl 2 0135800000 50 vh 0285100000 50 bs 0292500000 100 dek 5 see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 w ith/without plastic insulating collar mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data v ersion krg blue krg krs pa blue pa orange pa t erminal block with marking t erminal block without marking end plate (thickness mm) ap krg blue krg krs pa blue pa partition (thickness mm) tw wtw small partition krg blue krg krs pa blue pa tsch 6 cross-connection q 4 qb 4 2-pole 3-pole 4-pole 10-pole cover switchable cross-connection link vl 2 bs vh marking tags print dek standard 1 ) contact-proof with adp 4 cover 2 ) tightening torque for 16 mm 23 ) ti ghtening torque for 16 mm 2 profile (see section ?ccessories? stranded: 2 nm and awg6: 2 nm
feed-through terminals sak-series 129 a r # u dnv 16/58/67.5 16/63/60 18 mm/m 6/6.5 x 1.2 1000 v/125 a/35 mm 2 8 kv/3 4.0?.0/4.0?.0*** 2.5?6 2.5?0 2.5?5 2.5?5 b 8 125 a/35 mm 2 65 65 600 v/100 a/12? awg 600 v/120 a/12? awg y qty. w qty. 0550620000 20 0608220000 20 0555720000 20 0608320000 20 0608370000 20 0550630000 20 0555730000 20 0550660000 20 0608260000 20 0555760000 20 0608360000 20 t ype cat. no. qty. ap (3.0) 0303620000 10 ap (3.0) 0303670000 10 ap (3.0) 0303630000 10 ap (1.5) 0303660000 10 ap (3.0) 0303680000 10 tw (3.0) 0304320000 10 tw (3.0) 0304330000 10 tw (1.5) 0304360000 10 ql 2 0564900000 50 ql 3 0565000000 50 ql 4 0565100000 50 ql 10 0565200000 20 vh 17 0267000000 50 bs m 4x30 0267100000 50 ss m 4 0136400000 100 ad 4 0576700000 50 bsk m 4x32 0129100000 50 ps 4 0299600000 20 dek 5 see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data v ersion krg hexagon socket krg hexagon socket blue krg krs hexagon socket krs pa hexagon socket pa blue pa end plate (thickness mm) krg blue krg krs pa blue pa orange pa partition (thickness mm) krg blue krg krs pa blue pa cross-connection ql 3 vh bs ss 2-pole 3-pole 4-pole 10-pole switchable cross-connection link vl 2 bs vh cover / test plug ps 4 marking tags print dek standard a r i # lr u dnv 18/58/67.5 18/58/60 20 mm/m 6/6.5 x 1.2 800 v/125 a/35 mm 2 8 kv/3 4.0?.0/4.0?.0*** 6?6 16?0 10?5 10?5 b 9 125 a/35 mm 2 99 99 600 v/100 a/6? awg 600 v/145 a/6? awg y qty. w qty. 0303520000 20 0476520000 20 0303530000 20 0303560000 20 0380760000 20 0476560000 20 0582460000 20 0303580000 20 0380780000 20 t ype cat. no. qty. ap (3.0) 0303620000 10 ap (3.0) 0303670000 10 ap (3.0) 0303630000 10 ap (1.5) 0303660000 10 ap (3.0) 0303680000 10 tw (3.0) 0304320000 10 tw (3.0) 0304330000 10 tw (1.5) 0304360000 10 ql 2 0123600000 20 ql 3 0123700000 20 ql 4 0123800000 20 ql 10 0338600000 20 vh 17 0267000000 50 bs m 4x30 0267100000 50 ss m 4 0136400000 100 vl 2 0124000000 50 vh 24.5 0298700000 50 bs m 4x35 0298900000 50 ad 4 0178700000 20 bsk m 4x32 0129100000 50 ps 4 0299600000 20 dek 5 see ?ccessories a r # dnv 28/83.5/100.5 28/83.5/96.5 30 mm/m 10/s 8 d6911 1000 v/232 a/95 mm 2 8 kv/3 10.0?0.0 strips 10?6 3x9x0.8 10?20 2 ) 6x9x0.8 10?5 2 ) 6x13x0.5 10?5 6x16x0.8 b 12 232 a/95 mm 2 180 600 v/190 a/6?/0 awg 600 v/260 a/6?/0 awg y qty. w qty. 0550520000 10 0662220000 10 t ype cat. no. qty. ap (3.0) 0550920000 10 ap (3.0) 0550970000 10 ql 2 0551200000 10 ql 3 0407600000 10 ql 4 0407700000 10 vh 35 0551100000 10 bs m 5x50 0630200000 20 adp 3 0485400000 20 ps 4 0299600000 20 dek 5 see ?ccessories a r # lr u dnv 22/75/79.5 22/75/87 24 mm/m 8/s 6 d911 1000 v/192 a/70 mm 2 8 kv/3 6.0?2.0 strips 16 3x9x0.8 16?0 1 ) 6x9x0.8 16?0 1 ) 6x13x0.5 16?5 b 11 192 a/70 mm 2 180 600 v/145 a/4?/0 awg 600 v/150 a/4?/0 awg y vpe w qty. 0340820000 10 0340870000 10 0340830000 10 0139160000 10 t ype cat. no. qty. ap (4.0) 0340920000 10 ap (4.0) 0340930000 10 ap (2.0) 0340960000 10 ql 2 0345300000 20 ql 3 0167000000 20 vh 30.5 0345500000 20 bs m 5x45 0345600000 20 ss m 5 0346100000 100 ad 3 0344300000 10 bskm 5x45 0344400000 50 ps 4 0299600000 20 dek 5 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories *** for hexagon socket 1 ) 12 nm for 70 mm 2 2 ) 20 nm for 95 mm 2 and 120 mm 2 y y y y ww w w sak 35 n sak 35 n/35 sak 35 sak 35/35 sak 95 sak 95/35 sak 70 sak 70/35
130 feed-through terminals (spring-loaded) 11/77/72.5 12 mm 500 / 41 a 6 6 k v/3 0.75...16 0.75...10 y qty. y qty. 0623320000* 20 0623120000** 20 t ype cat. no. qty. ap (3.0) 0301420000 10 ql 2 0267400000 50 ql 3 0267500000 50 ql 4 0267600000 50 ql 10 0341700000 20 bs m 4x6 0149700000 100 sb 14 0135300000 100 bst 1 3878060000 20 ps 4 0299600000 20 stb 17 0147100000 50 r 8/50/60 8/50/53 12 mm 630 v/32 a 4 6 k v/3 0.5?.0 2 0.5? 0.5? y qty. w qty. 0497560000 50 9501160000 50 0497520000 50 t ype cat. no. qty. ap (3) 0270460000 10 tw (1.5) 3877960000 10 tw (2) 3833500000 20 tw (0.5) 0474700000 20 tsch 1 0319160000 100 ql 2 0194300000 50 ql 3 0194400000 50 ql 4 0194500000 50 ql 10 0338300000 10 vh 13.5 0248500000 100 bs m 3x20 0303000000 100 vh 2 0194700000 50 vh 21 0309600000 100 bs m 3x20 0296200000 50 ss 0164400000 50 ps 2.3 0180400000 50 stb 14 0168600000 50 adp 2 0485300000 1 dek see ?ccessories a r 11/50/60 12 mm 500 v/57 a 10 6 kv / 3 0.5?0 0.5?0 y qty. w qty. 0270320000 50 t ype cat. no. qty. ap (3) 0270420000 10 tw (2) 3833500000 20 tw (0.5) 0474700000 20 ql 2 0194300000 50 ql 3 0194400000 50 ql 4 0194500000 50 ql 10 0338300000 10 vh 17.5 0285200000 50 bs m 3x25 0292500000 100 ss 0164400000 50 qs 4 0369760000 10 vh 2 0528400000 50 vh 27 0309400000 50 bs m 3x25 0309800000 50 ss 0164400000 50 ps 2.4 0299600000 20 stb 18 0286500000 20 adp 2 0485300000 1 dek see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/-current rated cross-section mm 2 rated impulse voltage vde 0110/1.89/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data version pa krg end plate/partition/small partition ap tw tsch 1 pa krg pa hp hp pa cross-connection ql vh ss 2-pole 3-pole 4-pole 10-pole bs m 3 x ... switchable cross-connection link vh 21 dummy plug made from plastic, to keep the place of an extracted plug t est plug/socket ps stb plug-testsocket (ql cannot be used) cover plate marking tags print standard y y rsf 3 rsf 3/35 rsf 1 * with disconnector (73 mm height) ** disconnector with handle (86 mm height) y rsf 2 disconnect test terminal
ii. symbols thermocouples according to iec 584 din 43710 busbar material t erminal trade name a) type j fe iron (positive leg) cuni constantan (negative leg) b) type t cu copper (positive leg) cuni constantan (negative leg) c) type k nicr chromel (positive leg) ni alumel (negative leg) feed-through terminals for thermocouples sak-series 131 busbars made from thermocouple materials according to din iec 584 dimensions/approvals w idth/length/height (mm) with ts 32 y w idth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade t echnical data/vde rated voltage/current/cross-section t ightening torque range nm ordering data v ersion type nicr ni cuni fe cu nicr/ni k cu/cuni t fe/cuni j end plate (thickness mm) krg blue krg krs pa blue pa orange pa partition (thickness mm) krg blue krg krs pa wem for ts 32 hp marking tags print dek standard w eidm?llers thermocouple-treminals are specially designed for transmitting the smallest voltages in temperature measu- ring circuits. special busbars ensure that no false signals occur in the terminal when temperature differences exist in the positi- ve and negative path. this high measuring precision is necessary for, e.g. test beds, air craft engines, for complicated chemical processes, controls, etc. i. configuration of a temperature measuring circuit 1 thermocouple (sensor) 4 reference point 2 thermocouple terminals 5 supply conductors (to and from) 3 compensation conductor 6 measuring device the thermocouple terminals displayed in this measurement circuit are used to ther- moelectrically transmit thermal e.m.f. of the thermocouple to the reference point and indicating device via the thermo- couple. 6/36.5/49.5 10 mm/m 2.5/3.5 x 0.6 ??2.5 mm 2 0.4?.6 y cat. no. qty. 0107260000 100 0107160000 100 0189860000 100 0190060000 100 0189960000 100 t ype cat. no. qty. ap (1.5) 0279560000 20 tw (1.5) 0302860000 20 dek 6 see ?ccessories 6/54/59.5 6/54/60.5 9 mm/m 3/3.5 x 0.6 ??4 mm 2 0.5? wy qty. 1284160000 1338260000 100 1285660000 1338160000 100 1284060000 1338060000 100 t ype cat. no. qty. ap (1.5) 1397160000 20 wtw (ex)e 1058800000 20 tw hp (2.0) 0607000000 20 dek 6 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories y y w sak 2.5 tc dk 4 q/tc
132 feed-through terminals dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data t ype krg end plate, hard paper 0205100000 0205200000 tropic-proof 0180700000, 0205300000 0180800000, 0205400000 tropic-proof partition, hard paper (thickness in mm) 0151400000 0164600000 tropic-proof 0177100000 b/l/h (incl. ts 32) mm 0179900000 b/l/h (incl. ts 35) mm cross-connection 2-pole 3-pole 4-pole cover marking tags print dek standard t erminals/accessories sakg 28 i sakg 28 ii the weidm?ller sakg range offers the fol- lowing connection variants: clamping yoke/flat lug as a combination, v ersion i. flat lug, version ii. t wo types of threading are provided here. a) screw set with lock nut b) with thread in busbar clamping yoke connection, version iii. the stripped conductor can be connec- ted without further preparation. v ersions v ersion i version ii without thread v ersion ii g version iii with thread cables with cable lugs are connected to sakg terminals of version i and to ss stud terminals. fitting instructions for sakg terminals when tightening the clamping screw, it is r ecommended that the conductor be held against the direction of tightening to pre- vent deformation of the mounting rail and so as not to place the terminal foot under undue torsional forces. cover to ensure shock protection following connections of conductors, ah covers can be clipped onto the terminal. a r # u 28/70/63.5 15 mm/m 6/ 1000 v*/125 a/35 mm 2 8 kv/3 3? 6?5 6?5 10?5 6?5 b 9 125 a/35 mm 2 (ql 2) 125 600 v/95 a/2 awg 600 v/110 a/6? awg y cat. no. qty. 0170020000 10 y cat. no. qty. ep 1 (2) 0205100000 10 ep 1 (2) 0205200000 10 w cat. no. qty. y qty. tw 1 (2) 0151400000 10 tw 1 (2) 0164600000 10 2/120/75.5 ql 2 0193900000 5 ql 3 0407600000 5 ql 4 0407700000 5 ah 28 0326660000 5 dek 5 see ?ccessories a r # u dnv 28/70/53 ?m 6/ 1000 v*/125 a/35 mm 2 8 kv/3 3? 125 a/35 mm 2 (ql 2) 125 600 v/115 a/2 awg 600 v/110 a/6? awg y cat. no. qty. 0170320000 10 y cat. no. qty. ep 1 (2) 0205100000 10 ep 1 (2) 0205200000 10 w cat. no. qty. y qty. tw 1 (2) 0151400000 10 tw 1 (2) 0164600000 10 2/120/75.5 ql 2 0193900000 5 ql 3 0407600000 5 ql 4 0407700000 5 ah 28 0326660000 5 dek 5 see ?ccessories y y during conductor connection, observe clearance and creepage distances. insert partitions if necessary. mounting rails, end brackets, further marking material see ?ccessories
feed-through terminals sak-series 133 a r # u 32/87/84 32/87/84.5 26 mm/m 8/- 1000 v*/150 a/50 mm 2 8 kv/3 6?2 10?0 10?0 10?0 10?5 b 11 150 a/50 mm 2 (ql 2) 150 600 v/165 a/3 awg 600 v/170 a/1?/0 awg y qty. w qty. 0286620000 0637120000 10 y cat. no. qty. ep 1 (2) 0205300000 10 ep 1 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y + w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ql 2 0194000000 5 ql 3 0441500000 5 ql 4 0441600000 5 ah 32 0326760000 5 dek 5 see ?ccessories a r # u 32/80/53 32/80/51 -/m 8/- 1000 v*/150 a/50 mm 2 8 kv/3 6?2 150 a/50 mm 2 (ql 2) 150 600 v/200 a/3 awg 600 v/170 a/1?/0 awg y qty. w qty. 0170420000 10 0637320000 10 y cat. no. qty. ep 1 (2) 0205100000 10 ep 1 (2) 0205200000 10 w cat. no. qty. ep 1/35 (2) 0180700000 10 ep 1/35 (2) 0180600000 10 y + w qty. tw 1 (2) 0151400000 10 tw 1 (2) 0164600000 10 2/120**/75.5 2/120**/75.5 ql 2 0194000000 5 ql 3 0441500000 5 ql 4 0441600000 5 ah 32 0326760000 5 dek 5 see ?ccessories r # u 28/70/53 -/m 6/- 1000 v*/125 a/35 mm 2 8 kv/3 3? 125 a/35 mm 2 (ql 2) 125 600 v/110 a/6? awg y cat. no. qty. 0185020000 10 y cat. no. qty. ep 1 (2) 0205100000 10 ep 1 (2) 0205200000 10 w cat. no. qty. y qty. tw 1 (2) 0151400000 10 tw 1 (2) 0164600000 10 2/120/75.5 ql 2 0193900000 5 ql 3 0407600000 5 ql 4 0407700000 5 ah 28 0326660000 5 dek 5 see ?ccessories a r # u 28/70/63.5 15 mm/m 6/- 1000 v*/125 a/35 mm 2 8 kv/3 3? 6?5 6?5 10?5 6?5 b 9 600 v/95 a/2 awg 600 v/135 a/8? awg y cat. no. qty. 0170820000 10 y cat. no. qty. ep 1 (2) 0205100000 10 ep 1 (2) 0205200000 10 w cat. no. qty. y qty. tw 1 (2) 0151400000 10 tw 1 (2) 0164600000 10 2/120/75.5 ah 28 0326660000 5 dek 5 see ?ccessories * during conductor connection, observe clearance and creepage distances. insert partitions if nececssary ** for cat. no. 0180600000 and 0180700000: length = 160 mm. y y y y a r # u 32/94/84 32/94/84.5 26 mm/m 8/- 1000 v*/150 a/50 mm 2 8 kv/3 6?2 10?0 10?0 10?0 10?5 b 11 150 a/50 mm 2 600 v/165 a/3 awg 600 v/185 a/1?/0 awg y qty. w qty. 0286720000 10 0637220000 10 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y + w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ah 32 0326760000 5 dek 5 see ?ccessories y y r # u dnv 32/80/53 32/80/53 -/m 8/- 1000 v*/150 a/50 mm 2 8 kv/3 6?2 150 a/50 mm 2 (ql 2) 150 600 v/170 a/1?/0 awg y q t y . w qty. 0185120000 10 0637420000 10 y cat. no. qty. ep 1 (2) 0205100000 10 ep 1 (2) 0205200000 10 w cat. no. qty. ep 1/35 (2) 0180700000 10 ep 1/35 (2) 0180600000 10 y + w qty. tw 1 (2) 0151400000 10 tw 1 (2) 0164600000 10 2/120**/75.5 2/120**/75.5 ql 2 0194000000 5 ql 3 0441500000 5 ql 4 0441600000 5 ah 32 0326760000 5 dek 5 see ?ccessories ww ww sakg 28 ii g sakg 28 iii sakg 32 i sakg 32/35 i sakg 32 ii sakg 32/35 ii sakg 32 ii g sakg 32/35 ii g sakg 32 iii sakg 32/35 iii
dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data v ersion krg end plate, hard paper (thickness mm) 0205100000, 0180500000 0205200000, 0180600000 tropic-proof 0180700000, 0205300000 0180800000, 0205400000 tropic-proof partition, hard paper (thickness mm) 0151400000 0164600000 tropic-proof 0177100000 b/l/h (incl. ts 32) mm 0179900000 b/l/h (incl. ts 35) mm cross-connection 2-pole, ql 2 3-pole, ql 3 4-pole, ql 4 cover marking tags print dek standard 134 feed-through terminals r # u dnv 32/84/54 32/84/53 ?m 8/ 1000 v*/192 a/70 mm 2 8 kv/3 6?2 192 a/90 mm 2 (ql 2) 192 600 v/200 a/2/0?/0 awg y qty. w qty. 0150420000 10 0636620000 10 y cat. no. qty. ep 1 (2) 0205100000 10 ep 1 (2) 0205200000 10 w cat. no. qty. ep 1/35 (2) 0180500000 10 ep 1/35 (2) 0180600000 10 y+w qty. tw 1 (2) 0151400000 10 tw 1 (2) 0164600000 10 2/120/75.5 2/120/75.5 y+w qty. 0194000000 10 0441500000 10 0441600000 10 ah 32 0326760000 5 dek 5 see ?ccessories a r # u 40/95/84 46/95/85.5 27 mm/m 10/ 1000 v*/232 a/95 mm 2 8 kv/3 10...20 10?5 10?5 10?5 10?5 b 12 232 a/95 mm 2 (ql 2) 232 600 v/195 a/4/0 awg 600 v/250 a/2/0?/0awg y q t y . w qty. 0286820000 10 0637520000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y+w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 y qty. w qty. 0194100000 10 0211400000 10 0263500000 10 0444900000 10 0409800000 10 0445000000 10 ah 40 0326860000 5 dek 5 see ?ccessories a r # u dnv 40/90/53 46/90/53 ?m 10/ 1000 v*/232 a/95 mm 2 8 kv/3 10?0 232 a/95 mm 2 (ql 2) 232 600 v/230 a/4/0 awg 600 v/250 a/2/0?/0 awg y qty. w qty. 0170520000 10 0637720000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y+w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 y qty. w qty. 0194100000 10 0211400000 10 0263500000 10 0444900000 10 0409800000 10 0445000000 10 ah 40 0326860000 5 dek 5 see ?ccessories r # u 40/90/55 46/90/55 ?m 10/ 1000 v*/232 a/95 mm 2 8 kv/3 10?0 232 a/95 mm 2 (ql 2) 232 600 v/230 a/4/0 awg 600 v/250 a/2/0?/0 awg y qty. w qty. 0185220000 10 0637820000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y+w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 y qty. w qty. 0194100000 10 0211400000 10 0263500000 10 0444900000 10 0409800000 10 0445000000 10 ah 40 0326860000 5 dek 5 see ?ccessories *during conductor connection, observe clearance and creepage distances. insert partitions if necessary. mounting rails, end brackets, further marking material see ?ccessories w y w y w y w sakg 70 ii g sakg 70/35 ii g sakg 40 i sakg 40/35 i sakg 40 ii sakg 40/35 ii sakg 40 ii g sakg 40/35 ii g
feed-through terminals sak-series 135 r # u dnv 46/106/57.5 46/106/57 ?m 12/ 1000 v*/309 a/150 mm 2 8 kv/3 14?1 309 a/150 mm 2 (ql 2) 309 600 v/285 a/4/0 awg 600 v/365 a/300 mcm y qty. w qty. 0185320000 10 0638020000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y+w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ql 2 0247000000 5 ql 3 0444400000 5 ql 4 0444500000 5 ah 46 0326960000 5 dek 5 see ?ccessories a r # u 54/122/57 54/122/57 ?m 16/ 1000 v*/415 a/240 mm 2 8 kv/3 25?0 415 a/240 mm 2 (ql 2) 415 600 v/380 a/500 mcm 600 v/600 a/300?00 mcm y qty. w qty. 0170720000 10 0638120000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y+w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ql 2 0264400000 5 ql 3 0408000000 5 ql 4 0247400000 5 dek 5 see ?ccessories a r # u 40/100/84 46/100/85.5 27 mm/m 10/ 1000 v*/232 a/95 mm 2 8 kv/3 10?0 10?5 10?5 10?5 10?5 b 12 232 a/95 mm 2 600 v/195 a/4/0 awg 600 v/230 a/2/0?/0 awg y qty. w qty. 0286920000 10 0637620000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y + w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ah 40 0326860000 5 dek 5 see ?ccessories a r # u 46/106/55 46/106/54.5 ?m 12/ 1000 v*/309 a/150 mm 2 8 kv/3 14?1 309 a/150 mm 2 600 v/285 a/4/0 awg 600 v/365 a/300 mcm y qty. w qty. 0170620000 10 0637920000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y + w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ql 2 0247000000 5 ql 3 0444400000 5 ql 4 0444500000 5 ah 46 0326960000 5 dek 5 see ?ccessories * during conductor connection, observe clearance and creepage distances. insert partitions if necessary. ** suitable for connection of 1 aluminium conductor of max 185 mm 2 a r # u dnv 54/122/60 54/122/60 ?m 16/ 1000 v*/415 a/240 mm 2 8 kv/3 25?0 415 a/240 mm 2 (ql 2) 415 600 v/380 a/500 mcm 600 v/600 a/300?00 mcm y qty. w qty. 0185420000 10 0638220000 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. ep 2/35 (2) 0180700000 10 ep 2/35 (2) 0180800000 10 y+ w qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ql 2 0264400000 5 ql 3 0408000000 5 ql 4 0247400000 5 dek 5 see ?ccessories 46/112/74 23 mm/m 12/m 14/- 1000 v*/309 a/150 mm 2 8 kv/3 14?1/25?0 50?40 35?85 y qty. w qty. 1287920000** 5 y cat. no. qty. ep 2 (2) 0205300000 10 ep 2 (2) 0205400000 10 w cat. no. qty. y qty. tw 2 (2) 0177100000 10 tw 2 (2) 0179900000 10 2/160/90.5 2/160/90.5 ql 2 0194000000 5 ql 3 0441500000 5 ql 4 0441600000 5 ah 46 0326960000 5 dek 5 see ?ccessories *** suitable for connection of 2 al uminium conductors of max. 185 mm 2 y w y w y w y w y w y sakg 40 iii sakg 40/35 iii sakg 46 ii sakg 46/35 ii sakg 46 ii g sakg 46/35 ii g sakg 54 ii sakg 54/35 ii sakg 54 ii g sakg 54/35 ii g sakg 46/i al sakg 46/ii al
136 stud terminals w ww w y 21 18 25 kst 5 kst 5/35 kst 6 kst 6/35 kst 8 kst 8/35 a r # 24/60/72 24/62.5/64.5 ?m 8/ 1000 v 1 )/125 a/35 mm 2 8 kv/3 6?2 135 a/35 mm 2 200 600 v/115 a/12? awg y qty. w qty. 9501320000 25 9506950000 25 9528320000 25 y + w tw right 1718530000 10 tw left 1752800000 10 2/160/83.5 2/160/78.5 ql 2 9501360000 1 dek 5 see ?ccessories a r # 24/60/55 24/62.5/49.5 ?m 5/ 1000 v 1 )/57 a/10 mm 2 8 kv/3 2? 65 a/10 mm 2 600 v/50 a/12? awg y qty. w qty. 9503370000 25 9508230000 25 9528300000 25 y + w tw right 1718530000 10 tw left 2 ) 1752800000 10 2/160/83.5 2/160/78.5 ql 2 9503390000 1 dek 5 see ?ccessories 18/40/62 18/49.5/54.5 ?m 6/ 1000 v 1 )/76 a/16 mm 2 6 kv/3 3? 82 a/16 mm 2 600 v/85 a/12? awg 600 v/65 a/6 awg y qty. w qty. 0498220000 25 0649820000 25 cat. no. qty. tw ss6 (ts32) 0455860000 10 twhgw (2)(ts 35) 0607100000 20 2/129/93 2/70/62.5 ql 2 0284300000 20 ql 3 0279000000 20 dek 5 see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa vo ltage/current/conductor size ul vo ltage/current/conductor size csa ordering data v ersion krg pa ppo krg for ts 35 x 7.5 pa for ts 35 x 15/2.3 pa partition, (thickness mm) pa hard paper hm hm widt h/length/height (incl. ts 32) mm widt h/length/height (incl. ts 35) mm cross-connection 2-pole 3-pole marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories 1 ) with partition * depends on cable lug ss 6 ss 6/35 a r # 24/60/62 24/62.5/54.5 ?m 6/ 1000 v 1) /76 a/16 mm 2 8 kv/3 3? 82 a/16 mm 2 200 600 v/65 a/12? awg y qty. w qty. 9506940000 25 9528310000 25 y + w tw right 1718530000 10 tw left 1752800000 10 2/160/83.5 2/160/78.5 ql 2 9501350000 5 dek 5 see ?ccessories 30 2 ) left ap is required only once at beginning of terminal strip
stud terminals sak-series 137 w w 39 a r # 34/60/82 34/62.5/74.5 ?m 10/ 1000 v 1 )/192 a/70 mm 2 8 kv/3 10?0 207 a/70 mm 2 200 600 v/175 a/12?/0 y qty. w qty. 9501330000 20 9506960000 20 9528330000 20 y + w tw right 1718530000 10 tw left 1752800000 10 2/160/83.5 2/160/78.5 ql 2 9501370000 1 dek 5 see ?ccessories a r # 34/60/82 34/62.5/74.5 ?m 12/ 1000 v 1 )/232 a/95 mm 2 8 kv/3 14?1 250 a/95 mm 2 200 600 v/200 a/12?/0 y qty. w qty. 9506970000 20 9528340000 20 y + w tw right 1718530000 10 tw left 1752800000 10 2/160/83.5 2/160/78.5 ql 2 9501380000 1 dek 5 see ?ccessories kst 12 kst 12/35 kst 10 kst 10/35 37
138 pe terminals dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-2 rated voltage/current with pen/cross-section rated voltage/rated impulse voltage acc. to vde 0110/1.89/ pollution severity further technical data t ightening torque range nm clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 fexible h07v-k and ferrule din 46 228/1 mm 2 cable awg nr. plug gauge according to 60 947-7-1 size ordering data v ersion green/yellow pa blank t wo clamping yokes blank hexagon socket blank support block for insulation of mounting rails in insulated-earth installations sk - key, 8mm marking tags print dek standard a r # i 8/40/51.5 6.5/56/44 12 mm/m 3/3.5 x 0.6 ??4 mm 2 0.5?.0/0.5?.0* 0.5? 0.5? 0.5? 0.5? 22?0 a 4 y qty. w qty. 0354560000 10 0 0661160000 10 0 t ype cat. no. qty. sh 2 0494920000 10 dek 6.5 see ?ccessories? a r # 6/36.5/49.5 6/56/40 10 mm/m 2.5/3.5 x 0.6 ??2.5 mm 2 0.4?.8/0.5?.0* 0.5? 0.5?.5 0.5? 0.5?.5 22?4 a 3 y qty. w qty. 0474360000 10 0 0661060000 10 0 t ype cat. no. qty. sh 2 0494920000 10 dek 6 see ?ccessories a r # 10/40/51.5 10/56/44 12 mm/m 4/5.5 x 1.0 ??10 mm 2 1.2?.4/0.5?.0* 0.5?0 1.5? 0.5?0 0.5?0 20?8 b 6 y qty. w qty. 0354660000 80 0661360000 100 t ype cat. no. qty. sh 2 0494920000 10 dek 5 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories y y a r # 8/56/44 12 mm/m 3.5/4.0/0.8 ??6 mm 2 1.2?.6/0.5?.0* 0.5?0 1.5? 0.5?0 0.5? 20? a 5 w qty. 0661260000 100 t ype cat no. qty. sh 2 0494920000 10 dek 8 see ?ccessories w w y w w ek 2.5 n ek 2.5/35 ek 4 ek 4/35 ek 10 ek 10/35 ek 6/35 * for centre screw
pe terminals sak-series 139 r # 10/52/38 14 mm/m 4/ ??10 1.2?.4/2.0?.0* 1.5?0 1.5?0 1.5?0 1.5?0 16? b 6 y qty. 0323100000 20 t ype cat. no. qty. r # 14/46/39 16 mm/m 6/ ??35 mm 2 2.5?.0/2.0?.0* 6?5 6?5 6?6 10?5 8? b 8 y qty. qty. 0144400000 20 t ype cat. no. qty. sh 2 0494920000 10 r # 18/94/59.5 25 mm/m 8/ ??70 mm 2 6.0?2/2.0?.0* 10?0 10?0 10?0 10?0 6? b 10 y qty. w qty. 0213200000 20 1338300000 10 t ype cat. no. qty. sh 2 0494920000 10 a r # 18/58/67.5 16/58/60 20 mm/m 6/6.5 x 1.2 ??35 mm 2 2.5?.0/ ** 6?6 16?0 10?5 10?5 10? b 9 y qty. w qty. 0354760000 20 0661460000 20 t ype cat. no. qty. sh 2 0494920000 10 dek 5 see ?ccessories y y y a r # 12/50/57.5 12/56/50 16 mm/m 4/5.5 x 1.0 ??16 mm 2 1.2?.4/0.8?.0* 2.5?6 2.5?6 2.5?6 4?6 12? b 6 y qty. w qty. 0374660000 50 0190160000 50 t ype cat. no. qty. sh 2 0494920000 10 dek 5 see ?ccessories y y 25/76/100/92 25/76/100/92 27 mm/m 10/ ??95 mm 2 10.0?0.0/1.2?.4* 10?20 10?5 10?5 10?5 6?/0 b 12 yw qty. 0535300000 10 0535400000 10 0235000000 w w w ek 2 sake 35 sake 70 ek 35** ek 35/35 ek 16 ek 16/35 ek 95/35 ** adm f. ek 35/35 = 1.2 - 2.4 nm adm f. ek 35 = 0.8 - 1.6 nm
140 fuse terminals r i # u dnv 13/54/61 13/54/54 12 mm/m 4/5.5 x 1.0 500 v/6.3 a 3) /10 mm 2 6 kv/3 1.2?.4 4 0.5?6 1.5?0 0.5?0 0.5?0 b 6 (ql 2?) 47 (ql 6?0) 36 600 v/10 a/26?0 aw y qty. w qty. 0191120000 20 0501520000 20 0501500000 20 t ype cat. no. qty. ap (2.5) 0191320000 20 w emid-beige 0191300000 for y tw (2.0) 0607000000 20 5 x 25 mm 0.25 (m) 0546900000 10 0.5 (m) 0510300000 10 0.8 (m) 0646400000 10 1 (m) 0265800000 10 10 (m) 0193100000 10 2 (f) 0192700000 10 4 (f) 0192800000 10 6.3 (f) 0192900000 10 sk (5 x 25) 0282000000 20 dek 5 see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data/feed through-terminal base rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data v ersion pa krg beige wemid end plate/partition (thickness mm) g-fuse inserts acc. to iec 60127-2 (vde 0820 t.2 bl 1) rated current (a): 0.10 fast rated voltage 250 v 0.20 fast fast switching capacity 1500 a 0.25 fast (at 250 v, 50 hz, cos ? = 0.7) 0.50 fast 1.0 fast 1.6 fast 2.0 fast 2.5 fast 3.15 fast 4.0 fast 5.0 fast 6.3 fast contact sleeve screw cap/disconnector lever (spare) red pull lever marking tags print dek standard a r i # dnv 13/54/61 13/54/54 12 mm/m 4/5.5 x 1.0 500 v/6.3 a 3) /10 mm 2 6 kv/3 1.2?.4 4 0.5?6 1.5?0 0.5?0 0.5?0 b 6 (ql 2?) 47 (ql 6?0) 36 300 v/6.3 a/22?0 awg 600 v/10 a/26?0 awg y qty. w qty. 0191220000 20 0501620000 20 t ype cat. no. qty. ap (2.5) 0191320000 20 w emid beige 0191300000 20 for y tw (2.0) 0607000000 20 5 x 20 mm 0430300000 10 0430400000 10 0430500000 10 0430600000 10 0430700000 10 0430800000 10 0430900000 10 0431000000 10 sk (5 x 20) 0282100000 20 dek 5 see ?ccessories a r # 8/58/45.5 8/58/44 9 mm/m 3/3.5 x 0.6 500 v/6.3 a 2) /4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? a 3 (qb 2?) 10 300 v/6.3 a/12 max. awg 300 v/6.3 a/26?2 awg y+w cat.no. qty. 0474560000 10 0 t ype cat. no. qty. ap (1.5) 0380360000 20 5 x 20 mm 0430300000 10 0430400000 10 0430500000 10 0430600000 10 0430700000 10 0430800000 10 0430900000 10 0431000000 10 0553300000 10 0 th 0377060000 100 siha 1593020000 10 0 dek 8 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories w y y y a 8/73.5/59,8 8/73.5/55,7 9 mm/m 3/3.5 x 0.6 500 v/6.3 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 0.5? 0.5? a 4 (qb 2?) 10 300 v/15 a/12 max. awg y qty. w qty. 9503300000 50 9503310000 50 t ype cat. no. qty. ap 1 kdks 9503330000 25 w emid 9532470000 25 for y tw (2.0) 0607000000 20 5 x 20 mm 0430300000 10 0430400000 10 0430500000 10 0430600000 10 0430700000 10 0430800000 10 0430900000 10 0431000000 10 0553300000 100 th 0377060000 100 siha 1593020000 100 dek 8 see ?ccessories ww w y 1 ) multipole interruptable with group marking carrier sch2 2-pole cat. no. 1359500000 , 1000 mm cat. no. 0337400000 saks 1/g25 saks 1/35/g25 saks 1 saks 1/35 ask 1 1 ) ask 1/35 1 ) kdks 1 1 ) kdks 1/35 1 )
fuse terminals sak-series 141 13/69/62 13/69/63 12 mm/? 250 v/6.3 a 1 )/10 mm 2 0.5?6 0.5?0 b 6 600 v/10 a/22? awg y qty. w qty. 9509570000 20 9509600000 20 t ype cat. no. qty. ap (3) 9509630000 20 5 x 20 mm 0.10 (f) 0430300000 10 0.20 (f) 0430400000 10 0.25 (f) 0430500000 10 0.50 (f) 0430600000 10 1.00 (f) 0430700000 10 1.60 (f) 0430800000 10 2.00 (f) 0430900000 10 2.50 (f) 0431000000 10 3.15 fast 0431100000 10 4.0 fast 0431200000 10 5.0 fast 0431300000 10 6.3 fast 0431400000 10 5 x 20 sbl 0446100000 40 dek 5 see ?ccessories 13/69/62 13/69/63 12 mm/? 250 v/13 a 2 )/10 mm 2 0.5?6 0.5?0 b 6 600 v/15 a/22? awg y qty. w qty. 9509580000 20 9509610000 20 t ype cat. no. qty. ap (3) 9509630000 20 1 x 1/4 1 x 1/4" sbl 0446200000 40 dek 5 see ?ccessories 13/69/62 13/69/63 12 mm/? 440 v/10 a/10 mm 2 0.5?6 0.5?0 b 6 600 v/15 a/22? awg y qty. w qty. 9509620000 20 t ype cat. no. qty. ap (3) 9509630000 20 1 1/4 x 1/4 e 2 a 0294500000 10 e 3 a 0295700000 10 e 5 a 0294600000 10 e 7 a 0295800000 10 e 10 a 0293900000 10 11/4x1 /4" sbl 0446300000 40 dek 5 see ?ccessories y y y 1 ) max. fuse rating according to din 41 660, iec 127 cee4 type 1 2 ) fuse according to bs 1362 kskm 1 kskm 1/35 kskm 2 kskm 2/35 kskm 3 kskm 3/35
142 fuse terminals r i # u 28/80/81.5 28/80/75 12 mm/m 4/5.5 x 1 500 v/10 (25) a***/10 mm 2 6 kv/3 1.2?.4 4 0.5?6 0.5?0 0.5?0 0.5?0 b 6 (ql 2?) 47 (ql 6?0) 36 600 v/25 a/22? awg y qty. w qty. 0206820000 20 1368720000 20 diazed e 16 t ype cat. no. qty. tw hp (2.0) 0607000000 *20 ql 2 0207800000 20 ql 3 0207900000 20 ql 4 0208000000 20 ql 10 0338900000 20 ss m 4 0136400000 100 bs m 4x9 0103300000 100 gauge ring amp. colour cat. no. qty. p 16/10 red 0208900000 100 p 16/16 grey 0209000000 100 p 16/20 blue 0209100000 100 rated voltage 500 v e 10 a 0208500000 25 e 16 a 0208600000 25 e 20 a 0208700000 25 e 25 a 0208800000 25 sk 0284110000 20 dek 5 see ?ccessories w y r # lr u 28/80/80.5 28/80/66 13 mm/m 4/5.5 x 1 400 v/63 a***/16 mm 2 6 kv/3 1.2?.4 4 1.5?6 1.5?6 1.5?6 1.5?6 b 7 (ql 2?) 47 (ql 6?0) 36 600 v/63 a/14? awg y qty. w qty. 0359420000 20 0502120000 20 neozed d 02 t ype cat. no. qty. tw hp (2.0) 0607000000 *20 ql 2 0207800000 20 ql 3 0207900000 20 ql 4 0208000000 20 ql 10 0338900000 20 ss m 4 0136400000 100 bs m 4x9 0103300000 1 00 gauge ring amp. colour cat. no. qty. p1 8/20 blue 036180 0000 50 p1 8/25 yellow 036190 0000 50 p1 8/35 black 036200 0000 50 p18/ 50 white 036210 0000 50 rated voltage 400 v e 18/20 0361300000 10 e 18/25 0361400000 10 e 18/35 0361500000 10 e 18/50 0361600000 10 e 18/63 0361700000 10 sk 0359310000 20 dek 5 see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data/feed through-terminal base rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa vo ltage/current/conductor size ul vo ltage/current/conductor size csa ordering data v ersion krg krg end plate/partition (thickness mm) pa hp cross-connection ql ss fixing screws for cross-connections fuse inserts 1 1/4" x 1/4" nominal current (a): 0.5 fast 1.0 fast 2.0 fast 3.0 fast 5.0 fast 7.0 fast 10.0 fast g fuse inserts 5 x 30 mm (500 v~/0.032?.3 a). a vailable from wickmann-werke gmbh, annastr. 113, 58453 witten, germany, phone ++492302/6620 d fuse inserts screw cap (spare) red black marking tags print dek standard r # lr u 24/75/73 24/75/66 14 mm/m 4/5.5 x 1 400 v**/16 a/10 mm 2 6 kv/3 1.2?.4 4 0.5?6 1.5?0 0.5?0 0.5?0 b 6 (ql 2?) 47 (ql 6?0) 36 600 v/30 a/22? awg y qty. w qty. 0321320000 20 0501820000 20 neozed d 01 t ype cat. no. qty. tw hp (2.0) 0607000000 *20 ql 2 0328000000 20 ql 3 0328100000 20 ql 4 0328200000 20 ql 10 0339000000 20 ss m 4 0136400000 100 bs m 4x9 0103300000 100 gauge ring amp . col our cat. no. qty. p1 4/2 pink 013800 0000 50 p14/4b rr own 013810 0000 50 p14/6g r een 032860 0000 50 p14/10r ed 032870 0000 50 rated voltage 400 v e 14/2 0137400000 10 e 14/4 0137500000 10 e 14/6 0328300000 10 e 14/10 0328400000 10 e 14/16 0328500000 10 sk 0339410000 20 dek 5 see ?ccessories ** also for 440 v~ with neozed marina fuse *** current for overload up to 10 a, for short circuit up to 25 a 3 ) for fuse inserts 1 1/4 x 1/4?def 63 4 ) for fuse inserts 5 x 30 a r # lr u 13/54/61 13/54/55 12 mm/m 4/5.5 x 1 500 v/10 a/10 mm 2 6 kv/3 1.2?.4 4 0.5?6 1.5?0 0.5?0 0.5?0 b 6 (ql 2?) 47 (ql 6?0) 36 300 v/10 a/22?0 awg 600 v/10 a/22?0 awg y qty. w qty. 0248920000 3 )20 0667520000 3 )20 0297520000 4 )20 0328920000 4 )20 t ype cat. no. qty. ap (2.5) 0191320000 for y tw (2.0) 0607000000 fuse insert e 0.5 a 0533800000 e 1 a 0525500000 e 2 a 0294500000 e 3 a 0295700000 e 5 a 0294600000 e 7 a 0295800000 e 10 a 0293900000 sk (5 x 30) 0282000000 20 sk (1/4? 1 1 / 4 ) 0428900000 20 dek 5 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories www y y y saks 2 saks 2/35 saks 5 saks 5/35 saks 4 saks 4/35 saks 3 saks 3/35 *only for ts 32
fuse terminals sak-series 143 dimensions/approvals t erminal width (+ 0.2 assembly tolerance) mm insulation stripping length mm connection data screw connection, solid screw connection, flexible/ferrule with/without plastic collar conductor cross-section vde rated data current v oltage led-current (24?0 v) led-current (115?30 v) led-current (24?30 v) incandescent lamp-current neon lamp-current cross-section ordering data 24 v 24 v 48 v 60 v 115 v 230 v 24 v~ 48 v~ 60 v~ 115 v~ 230 v~ accessories mounting rail end brackets (thickness mm) for ts 32 y for ts 35 w end plate/end plate (thickness mm) cross-connections t ype ?l cross-connection t ype ?b straight angled fixing screw (fits ql) disconnect lever (spare) a r 24/75/73 24/75/66 14 mm/m 4/5.5 x 1 400 v/30 a/10 mm 2 6 kv/3 1.2?.4 4 0.5?6 1.5?0 0.5?0 0.5?0 b 6 (ql 2?) 47 (ql 6?0) 36 600 v/30 a/20? awg 600 v/30 a/22? awg y qty. w qty. 0162220000 20 0178220000 20 10.3 x 38,1 t ype cat. no. qty. tw hp (2.0) 0607000000 *20 ql 2 0328000000 20 ql 3 0328100000 20 ql 4 0328200000 20 ql 10 0339000000 20 ss m 4 0136400000 100 bs m 4 x 9 0103300000 100 sk (w. spring) 0161730000 20 dek 5 see ?ccessories w y mounting rails, end brackets, further marking material see ?ccessories kdks 1 fuse insert 5 x 20 ac model dc model fuse terminals with fault indicator ask 1 ld 1) when using qb, the rated cross-current reduces to max. 2.5 mm 2 wa r ning: in the event of a faulty fuse, the connection system is live! wa r ning: in the event of a faulty fuse, the connection system is live! saks 4 usa a r 8 9 0.5? mm 2 0.5? mm 2 awg 22?2 6.3 a 24?30 v (depending on terminal) 2 ma 2 ma 4 mm 2 t ype cat. no. qty. ask 1 ld 8050810000 25 ask 1 ld 0222760000 25 ask 1 ld 0225260000 25 ask 1 ld 0226460000 25 ask 1 ld 0225460000 25 ask 1 ld 0225660000 25 ask 1 ld 0222860000 25 ask 1 ld 0225360000 25 ask 1 ld 0226360000 25 ask 1 ld 0225560000 25 ask 1 ld 0225760000 25 mountable on ts 32 and ts 35 ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ewk 1 0206160000 50 ew 35 0383560000 50 ap pa (1.5) 0380360000 20 qb 2 1 ) 0461100000 100 qb 3 1 ) 0461200000 50 qb 4 1 ) 0461300000 50 th (spare) 0377060000 100 8 9 0.5? mm 2 0.5? mm 2 awg 22?2 6.3 a 24?30 v (depending on terminal) 2 ma 4 mm 2 t ype cat. no. qty. kdks 1 8146450000 25 kdks 1 8148930000 25 kdks 1 8148920000 25 kdks 1 8142840000 25 kdks 1 8148910000 25 mountable on ts 32 and ts 35 ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ew 35 0383560000 50 qb 2 1 ) 0461100000 100 qb 3 1 ) 0461200000 50 qb 4 1 ) 0461300000 50 qb 58 1 ) 0545400000 qb 58 1 ) 0545300000
144 fuse terminals with fault indicator dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w t erminal width (+ 0.2 assembly tolerance) mm insulation stripping length/clamping screw/screwdriver blade connection data screw connection, solid screw connection, flexible conductor cross-section further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 vde rated data v oltage/current led-current (24?0 v) led-current (115?30 v) incandescent lamp-current neon lamp-current cross-section ordering data v oltage fuse insert 5 x 20 led 24 v acc. to iec 60127-2 (vde 0820 t.2 bl 1) 24 v~ without indicator 48 v 48 v~ incandescent lamp 24 v 0 48 v 0 neon lamp 115 v 0 230 v 0 fuse insert 5 x 25 led 24 v acc. to din 41576 without indicator incandescent lamp 48 v 0 neon lamp 115 v 0 230 v 0 accessories mounting rail end brackets (thickness mm) for ts 32 y for ts 35 w end plate (thickness mm) cross-connection t ype ?l cross-connection t ype ?b fixing screw (fits ql) screw cap (spare) neon lamp saks 1 fuse insert 5 x 20/5 x 25 wa r ning: in the event of a faulty fuse, the connection system is live! saks 4 fuse insert e14/d 01 (e.g. neozed d 01) wa r ning: in the event of a faulty fuse, the connection system is live! saks 6 fuse insert 11/4 x 1/4 acc. to def 63 wa r ning: in the event of a faulty fuse, the connection system is live! saks 7 fuse insert 5 x 20/5 x 25 wa r ning: in the event of a faulty fuse, the connection system is live! 24 14 0.5?6 mm 2 0.5?0 mm 2 awg 20? 1.2?.4 4 ?16 a 1 ma 10 mm 2 t ype cat. no. qty. saks 4 ts 32 neon lamp v oltage 115 v 0 0101820000 10 480 v 0 0102120000 10 t ype cat. no. qty. ts 32 0122800000 ewk 1 (8.5) 0206160000 50 a r 12 12 0.5?6 mm 2 0.5?0 mm 2 awg 20? 1.2?.4 4 500 v~/10 a 10 a 1 ma 1 ma 10 mm 2 t ype cat. no. qty. saks 7 krg for 5 x 25 0576120000 40 saks 7 krg for 5 x 20 0573120000 40 exchangable neon lamps (please order separately) t ype cat. no. qty. ts 32 0122800000 ewk 1 (8.5) 0206160000 50 ap krg (3) 0146720000 20 ql 2 0207800000 20 ql 3 0207900000 20 ql 4 0208000000 20 ql 10 0338900000 20 bs m 4 x 9 m.ss 0133300000 100 neon lamp 230 v~ 0550300000 neon lamp 115 v~ 0550200000 a r 12 12 0.5?6 mm 2 0.5?0 mm 2 awg 20? 1.2?.4 4 500 v~/10 a 10 a 1 ma 1 ma 10 mm 2 t ype cat. no. qty. saks 6 krg 0531820000 40 for 1 1 / 4 ?x 1 / 4 ?acc. to def 63 exchangable neon lamps (please order separately) t ype cat. no. qty. ts 32 0122800000 ewk 1 (8.5) 0206160000 50 ap krg 0146720000 20 ql 2 0191400000 50 ql 3 0191500000 50 ql 4 0191600000 20 ql 10 0338800000 20 bs m 3 x 6 m.ss 0346200000 100 neon lamp 230 v~ 0550300000 neon lamp 115 v~ 0550200000 a r 13 12 0.5?6 mm 2 0.5?0 mm 2 awg 20? 1.2?.4 4 ?10 a 5 ma 50 ma 0.5 ma 10 mm 2 y qty. w qty. saks 1 ld 0371420000 10 0225820000 10 1111220000 10 1111320000 10 0371420000 10 0214020000 10 saks 1 gl 0173220000 10 0378920000 10 saks 1 gl 0385320000 10 8068330000 10 0306120000 10 0199920000 10 sak 1 ld on demand saks gl on demand saks 1 gl 0309320000 10 0198620000 10 t ype cat. no. qty. ts 32 0122800000 ts 35x7.5 0383400000 ts 35x15 0498000000 ewk 1 (8.5) 0206160000 50 ew 35 (8.5) 0383560000 50 ap krg (3) 0191320000 20 sk (5 x 20) 0282100000 20 sk (5 x 25) 0282000000 100
fuse inserts and gauge rings for weidm?ller fuse terminals sak-series 145 for terminal type saks 1 saks 7 ask 1 wsi 6 saks 1 saks 7 wsi 6 saks 3 2 ) saks 6 saks 2 saks 4 4 ) saks 5 gauge rings for terminal type saks 4 and 4/35 saks 5 and 5/35 saks 2 and 2/35 size (mm) 5 x 20 breaking capacity 1500 a (at 250 v, 50 hz, cos : 0.7) 5 x 25 m. k. 1 ) breaking capacity 80 a (at 250 v, 50 hz, cos : = 1) e 0.5 a e 1 a e 2 a e 3 a e 5 a e 7 a e 10 a e 10 a e 16 a e 20 a e 25 a e 14/2 e 14/4 e 14/6 e 14/10 e 14/16 e 18/20 e 18/25 e 18/35 e 18/50 e 18/63 rated voltage (v) 250 250 440 500 400 400 rated current (a) type 0.1 (f) g 20/0.10a/f 0.2 (f) g 20/0.20a/f 0.25 (f) g 20/0.25a/f 0.5 (f) g 20/0.50a/f 0.63 (f) g 20/0.63a/f 1.0 (f) g 20/1.00a/f 1.6 (f) g 20/1.60a/f 2.0 (f) g 20/2.00a/f 2.5 (f) g 20/2.50a/f 3.15 (f) g 20/3.15a/f 4.0 (f) g 20/4.00a/f 5.0 (f) g 20/5.00a/f 6.3 (f) g 20/6.30a/f 0.25 (m) g 25/0.25a/m 0.5 (m) g 25/0.50a/m 0.8 (m) g 25/0.80a/m 1 (m) g 25/1.00a/m 10 (m) 5 )g 25/10.0a/m 2 (f) g 25/2.00a/f 4 (f) g 25/4.00a/f 6.3 (f) g 25/6.30a/f (m) = mitteltr?ge (f) = fast 0.5 gz 0.5a/f 1 gz 1.0a/f 2 gz 2.0a 3 gz 3.0a 5 gz 5.0a 7 gz 7.0a 10 gz 10.0a 10 e 16/10a rt 16 e 16/16a gr 20 e 16/20a bl 25 e 16/25a ge 2e 14/2a rs 4e 14/4a br 6e 1 4/6a gn 10 e 14/10a rt 16 e 14/16a gr 20 e 18/20a bl 25 e 18/25a ge 35 e 18/35a sw 50 e 18/50a ws 63 e 18/63a ku (f) = fast (m) = miedium-delayed action cat. no. qty. 0430300000 10 0430400000 10 0430500000 10 0430600000 10 0439000000 10 0430700000 10 0430800000 10 0430900000 10 0431000000 10 0431100000 10 0431200000 10 0431300000 10 0431400000 10 0546900000 10 0510300000 10 0646400000 10 0265800000 10 0193100000 10 0192700000 10 0192800000 10 0192900000 10 0533800000 10 0525500000 10 0294500000 10 0295700000 10 0294600000 10 0295800000 10 0293900000 10 0208500000 25 0208600000 25 0208700000 25 0208800000 25 0137400000 10 0137500000 10 0328300000 10 0328400000 10 0328500000 10 0361300000 10 0361400000 10 0361500000 10 0361600000 10 0361700000 10 g fuse inserts 5 x 20 without indicator acc. to iec 60127-2 (vde 0820 t.2 bl 1) g fuse inserts 5 x 25 with indicator acc. to din 41576 1 ) 33 ka breaking capacity 33 ka fast d fuse inserts e 16 with indicator acc. to din 49360 (diazed) d fuse inserts e 14 size d 01 and e 18 size d 02 with indicator acc. to din 49522 (neozed) 3 ) cat. no. qty. 0138000000 50 0138100000 50 0328600000 50 0328700000 50 0361800000 50 0361900000 50 0362000000 50 0362100000 50 0208900000 100 0209000000 100 0209100000 100 gauge ring type p 14/2 p 14/4 p 14/6 p 14/1 p 18/20 p 18/25 p 18/35 p 18/50 p 16/10 p 16/16 p 16/20 amp. colour 2 pink 4br own 6gr een 10 red 20 blue 25 yellow 35 black 50 white 10 red 16 grey 20 blue t ype p 14/2d01 rs p 14/4d01 br p 14/6d01 gn p 14/10d01 rt p 18/20d02 bl p 18/25d02 ge p 18/35d02 sw p 18/50d02 ws p 16/10 rt p 16/16 gr p 16/20 bl note: 1 ) the siba company also supplies 5 x 25 g fuse inserts with indicators in a shipbuilding model for 450 v ac. 2 ) 5 x 30 (500 v ac) fuse inserts for saks 3 are available from the wickmann company 3 ) the lindner company also supplies neozed fuse cartridges in an additional shipbuilding mode for 440 v ac. 4 ) fuse cartridges with the dimensions 1"x 1 / 4 " c 25.4x6.35 mm and 13/32"x1 1 / 2 " c 10.3x38.1 mm ar not included in product line. 5 ) only for saks 1 and saks 7. fuse inserts 1 1 / 4 ?x 1 / 4 ? without indicator acc. to bs 88 fuse inserts
146 disconnect test terminals 1 ) without dls 2 ) with dls empty 3 ) with dls 1n4007 4 ) when using qb the rated cross-current reduces to max. 2.5 mm 2 5 ) w ith dkt 4 only on upper terminal level 6 ) as disconnect test terminal rated voltage 250 v y y y y mounting rails, end brackets, further marking material see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 w ith/without plastic insulating collar mm 2 plug gauge according to 60 947-7-1 size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa vo ltage/current/conductor size ul vo ltage/current/conductor size csa ordering data t ype krg pa w ithout diode pa w ith diode pa blue pa orange pa w ith 2 stb 5 ) krg w ith 2 stb 5 )pa w ith 2 stb 5 ) without diode pa w ith 2 stb 5 ) blue end plate (thickness mm) krg pa blue pa partition (thickness mm) cross-connection qb 4 2-pole 3-pole 4-pole 25-pole contact sleeve (spare) t est plug diode plug (spare) without diode with diode 1n4007 with diode 1n4007 with jumper marking tags print dek standard w ww w dls 2 dkt 4 dkt 4/35 dkt 4 v dkt 4 v/35 sakr sakr/35 sakr-d sakr-d/35 a r # 6.5/42/40.5/54.5 (opened) 6.5/46/38/52 8 mm/m 3/3.5 x 0.6 400 v 6 )/10 a/4 mm 2 6 kv/3 0.5?.0/0.5 stb 2/1 0.5? 1.5? 0.5? 0.5? a 3 (qb 2?5) 10 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg y qty. w qty. 0412120000 10 0 0412160000 10 0 0172160000 10 0 0412180000 100 0172180000 100 1461960000 100 0412220000 100 0412260000 100 0183360000 100 0412280000 100 0183380000 100 t ype cat. no. qty. ap (1.5) 0211320000 20 ap (1.5) 0211360000 20 ap (1.5) 0211380000 20 tw hp (1.0) 0297100000 20 qb 2 4 ) 0482700000 100 qb 3 4 ) 0482800000 50 qb 4 4 ) 0482900000 50 qb 25 blank 4 ) 0134000000 20 ps 2.3 0180400000 20 dek 6.5 see ?ccessories 6.5/42/40.5/57 (with dls 2) 6.5/46/38/54.5 8 mm/m 3/3.5 x 0.6 400 v/10 a/4 mm 2 6 kv/3 0.5?.0/0.5 stb 2/1 0.5? 1.5? 0.5? 0.5? a 3 (qb 2?5) 10 300 v/10 a/26?2 awg 300 v/10 a/22?2 awg y qty. w qty. 0412960000 1 )100 0299960000 1 )50 0413060000 2 ) 50 0185760000 2 )50 0263660000 3 )50 0299560000 3 )50 0546460000 1 )100 0413160000 2 )50 t ype cat. no. qty. ap (1.5) 0211360000 20 tw hp (1.0) 0297100000 20 qb 2 4 ) 0482700000 100 qb 3 4 ) 0482800000 50 qb 4 4 ) 0482900000 50 qb 25 blank 4 ) 0134000000 20 ps 2.3 0180400000 20 dls 2 0321060000 50 dls 2 ) 0630160000 50 dls 2 ( 0547760000 50 dls 2 0547660000 25 dek 6.5 see ?ccessories a r # 6/65/56.5/70 (opened) 6/65/56.5/70 9 mm/m 3/3.5 x 0.6 400v/10 a/4 mm 2 6 kv/3 0.5?.0/0.5 stb 2/1 0.5? 1.5? 0.5? 0.5? a 3 (qb 2?) 10 300 v/10 a/22?2 awg 300 v/10 a/26?2 awg y qty. w qty. 0687360000 50 0687460000 50 0327860000 50 0327960000 50 t ype cat. no. qty. ap (1.5) 0687560000 20 tw hp (2.0) 0607000000 20 qb 2 4 ) 0482700000 100 qb 3 4 ) 0482800000 50 qb 4 4 ) 0482900000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories 6/65/56.5/70 (opened) 6/65/56.5/70 9 mm/m 3/3.5 x 0.6 400 v/10 a/4 mm 2 6 kv/3 0.5?.0/0.5 stb 2/1 0.5? 1.5? 0.5? 0.5? a 3 (qb 2?) 10 300 v/10 a/22?2 awg 300 v/10 a/26?2 awg y qty. w qty. 1304860000 50 1304960000 50 t ype cat. no. qty. ap (1.5) 0687560000 20 tw hp (2.0) 0607000000 20 qb 2 4 ) 0482700000 100 qb 3 4 ) 0482800000 50 qb 4 4 ) 0482900000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories
disconnect test terminals sak-series 147 y w a r # 8/58/49 8/58/44 9 mm/m 3/3.5 x 0.6 500 v/19 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? a 3 (qb 2?) 10 300 v/15 a/12 max. awg 300 v/6.3 a/26?2 awg y + w qty. 0456360000 100 0105260000 100 t ype cat. no. qty. ap (1.5) 0380360000 20 tw hp (2.0) 0607000000 20 qb 2 4 ) 0461100000 100 qb 3 4 ) 0461200000 50 qb 4 4 ) 0461300000 50 k sleeve 0553300000 100 dek 5 fw see ?ccessories ask 1 ask 1/35 multipole interruptable with group marking carrier schs 2; 2-pole (cat. no. 1359500000 ) 1000 mm (cat. no. 0337400000 )
148 feed-through terminals with tab connection dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/-current rated cross-section for clamping yokes rated cross-section tab 6.3/2.8 mm rated voltage vde 0110/1.89/pollution severty further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data version slotted krg slotted blue krg slotted pa unslotted krg unslotted blue krg unslotted pa end plate/partition/small partition (thickness mm) ap tw tsch 1 krg blue krg pa pa hp hp only for pa cross-connection q4 2-pole 3-pole 4-pole 10-pole 25-pole plug adapter 2-pole 3-pole 4-pole clips into pa version 5-pole of ast 3 and ast 4 only 8-pole t est plug/socket plug-test socket without using ql for ts 32 ps stb insulation sleeve marking tags print dek standard a r # u dnv 6.5/58/53.5 6.5/58/46 500 v 1 )/- - 2.5/1.0 mm 2 6 kv/3 (ql 2?0) 20 300 v/13 a/ 300 v/16 a/ y qty. w qty. 0478220000 50 0478260000 2 )50 0699660000 2 )50 0266320000 50 0266360000 2 )50 0664860000 2 )50 t ype cat. no. qty. ap (3.0) 0266420000 20 ap (1.5) 0266460000 20 tw (0.5) 0474700000 20 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2 0336700000 50 q 3 0336800000 50 q 4 0336900000 50 q 10 0368800000 20 stb 14 0168600000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6.5 see ?ccessories a r # dnv 6.5/40/47.5 6.5/44/40 500 v 1 )/- - 2.5/1.0 mm 2 6 kv/3 (ql 2?0) 20 300 v/13 a/ 300 v/16 a/ y qty. w qty. 0442420000 100 0442470000 100 0460360000 2 )100 0298020000 100 0236760000 2 )100 0479360000 2 )10 t ype cat. no. qty. ap (3.0) 0298120000 20 ap (1.5) 0460560000 20 tw (1.5) 0130160000 20 tw (1.0) 0297100000 20 tsch 1 0319160000 100 q 2 0336700000 50 q 3 0336800000 50 q 4 0336900000 50 q 10 0368800000 20 sta 2.5/2 0165860000 100 sta 2.5/3 0165960000 50 sta 2.5/4 0190360000 50 sta 2.5/5 0166060000 50 sta 2.5/8 0166160000 50 stb 14 0168600000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6 see ?ccessories a r # 6.5/40/47.5 6.5/44/40 9 mm/m 2.5/3.5 x 0.6 500 v 1 )/- 2.5 mm 2 2.5/1.0 mm 2 6 kv/3 0.4?.7 1 0.5? 1.5?.5 0.5?.5 0.5?.5 a 3 (ql 2?0) 20 300 v/13 a/22?2 awg 300 v/16 a/24?2 awg y qty. w qty. 0439120000 100 0460460000 100 0321220000 100 0321270000 100 0479460000 100 t ype cat. no. qty. ap (3.0) 0298120000 20 ap (1.5) 0460560000 20 tw (1.5) 0130160000 20 tw (1.0) 0297100000 20 tsch 1 0319160000 100 q 2 0336700000 50 q 3 0336800000 50 q 4 0336900000 50 q 10 0368800000 20 sta 2.5/2 0165860000 100 sta 2.5/3 0165960000 50 sta 2.5/4 0190360000 50 sta 2.5/5 0166060000 50 sta 2.5/8 0166160000 50 stb 14 0168600000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6 see ?ccessories a r # dnv 6.5/58/53.5 6.5/58/46 12 mm/m 3/3.5 x 0.6 500 v 1 )/- 4 mm 2 2.5/1.0 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? a 4 (ql 2?0) 20 300 v/13 a/22?2 awg 300 v/16 a/24?2 awg y qty. w qty. 0479220000 50 0479260000 50 0664960000 50 0334520000 50 0334560000 50 0699760000 50 t ype cat. no. qty. ap (3.0) 0266420000 20 ap (1.5) 0266460000 20 tw (1.0) 0474700000 20 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2 0336700000 50 q 3 0336800000 50 q 4 0336900000 50 q 10 0368800000 20 stb 14 0168600000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6.5 see ?ccessories 1 ) with insulation sleeve 2 ) shock proof with adp 4 cover profiles adp4 (see section ?ccessories? mounting rails, end brackets, further marking material see ?ccessories y y yy w w ww ast 1 ast1/35 6.3 2.8 ast 3 ast 3/35 6.3 2.8 ast 4 ast 4/35 6.3 2.8 ast 5 ast 5/35 6.3 2.8
feed-through terminals with tab connection sak-series 149 dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/-current rated cross-section for clamping yokes rated cross-section tab 6.3/2.8 mm rated voltage vde 0110/1.89/pollution severty further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2 pole a continuous current rating of cross-connection multipole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data version slotted krg slotted blue krg slotted pa unslotted krg end plate/partition/small partition (thickness mm) ap tw tsch 1 krg blue krg pa pa hp t cross-connection ql qb 4 2-pole 3-pole 4-pole 10-pole 25-pole bs m 3 x 4.5 bs m 3 x 24 t est plug/socket ps insulation sleeve marking tags print dek standard sak 4 s sak 4 s/35 6.3 2.8 sak 4 ss sak 4 ss/35 6.3 2.8 sakr f sakr f/35 2.8 a r # 6.5/42/40.5/54.5 (opened) 6.5/42/40.5/32.5 8 mm/m 3/3.5 x 0.6 250 v 1 )/10 a 4 mm 2 -/1.0 mm 2 6 kv/3 0.5?.0 1 0.5? 1.5? 0.5? 0.5?.5 a 3 (qb 2?5) 10 300 v/10 a/22?2 awg 300 v/10 a/26?2 awg y qty. w qty. 0663660000 100 6382870000 100 with 1 stb 6 t ype cat. no. qty. ap (1.5) 0211360000 20 tw (1.0) 0297100000 20 qb 2* 0482700000 100 qb 3* 0482800000 50 qb 4* 0482900000 50 qb 25 blank* 0134000000 20 ps 2.3 0180400000 20 ih 2.8 0386060000 200 dek 6.5 see ?ccessories a r # u 6.5/40/51.5 6.5/40/49.5 12 mm/m 3/3.5 x 0.6 500 v 1 )/16 a 4 mm 2 2.5/1.0 mm 2 6 kv/3 0.5?.0 2 0.33? 1.5? 0.5? 0.5? a 4 (ql 2?0) 36 a at 6 mm 2 300 v/13 a/26?2 awg 300 v/13 a/26?2 awg y qty. w qty. 0401220000 100 0401260000 100 0630360000 100 t ype cat. no. qty. ap (1.5) 0117920000 20 ap (1.5) 0117960000 20 ap (1.5) 0130160000 20 tw (1.0) 0297100000 20 ql 2 0130600000 100 ql 3 0130700000 100 ql 4 0130800000 50 ql 10 0338200000 20 bs m 3x4.5 1593210000 100 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6.5 see ?ccessories a r # u 6.5/40/51.5 6.5/40/49.5 500 v 1 )/16 a - 2.5/1.0 mm 2 6 kv/3 (ql 2?0) 36 a at 6 mm 2 300 v/13 a/18?4 awg 300 v/13 a/18?4 awg y qty. w qty. 0479620000 10 0479660000 100 0630460000 100 0352920000 10 t ype cat. no. qty. ap (1.5) 0117920000 20 ap (1.5) 0117970000 20 ap (1.5) 0117960000 20 tw (1.5) 0130160000 20 tw (1.0) 0297100000 20 ql 2 0130600000 100 ql 3 0130700000 100 ql 4 0130800000 50 ql 10 0338200000 20 bs m 3x4.5 1593210000 100 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6.5 see ?ccessories *the conductor cross-section for the screw connection is reduced to 2.5 mm 2 when qb is used 1 ) with insulation sleeve yy y mounting rails, end brackets, further marking material see ?ccessories w w w
150 feed-through terminals with tab connection dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/-current rated cross-section for clamping yokes rated cross-section tab 6.3/2.8 mm rated voltage vde 0110/1.89/pollution severty further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 w ith/without plastic insulation collar plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2 pole a continuous current rating of cross-connection multipole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data v ersion pa end plate (thickness mm) pa partition for ts 32 hp small partition tsch 6 cross-connection q 3 2-pole 3-pole 4-pole 10-pole t est plug/socket plug test socket without using ql stb plug test socket for use with ql ps insulation sleeve marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories 1 ) with insulation sleeve a r # lr u 6/54/60.5 400 v 1 )/ 2 x 16 a - 2.5/1.0 mm 2 8 kv/3 (ql 2?0) 20 300 v/10 a/22?2 awg 300 v/10 a/22?2 awg w cat. no. qty. 0217160000 100 t ype cat. no. qty. ap (1.5) 0631360000 20 tsch 6 0190260000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6 see ?ccessories a r # lr u 6/54/60.5 400 v 1 )/2x10 - 1.0 mm 2 4 kv/3 (ql 2?0) 20 300 v/10 a/22?2 awg 300 v/10 a/22?2 awg w cat. no. qty. 0297060000 100 t ype cat. no. qty. ap (1.5) 0631360000 20 tsch 6 0190260000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 dek 6 see ?ccessories a r # u 6/54/59.5 6/54/60.5 9 mm/m 3/3.5 x 0.6 400 v 1 )/2 x 10 4 mm 2 1.0 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? a 3 (ql 2?0) 20 300 v/10 a/22?2 awg 300 v/10 a/22?2 awg y qty. w qty. 0631260000 100 0686660000 100 t ype cat. no. qty. ap (1.5) 0631360000 20 tw hp (2.0) 0607000000 20 tsch 6 0190260000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6 see ?ccessories a r # 6/54/59.5 6/54/60.5 9 mm/m 3/3.5 x 0.6 400 v 1 )/ 2 x 10 4 mm 2 1.0 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? a 3 (ql 2?0) 20 300 v/10 a/22?2 awg 300 v/10 a/22?2 awg y qty. w qty. 0631160000 100 0686560000 100 t ype cat. no. qty. ap (1.5) 0631360000 20 tw hp (2.0) 0607000000 20 tsch 6 0190260000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ps 2.3 0180400000 20 ih 2.8 0386060000 100 dek 6 see ?ccessories y y dk 4 ss/35 dk 4 ss/35 only 2.8 dk 4 s dk 4 s/35 dk 4 s only 2.8 dk 4 s/35 only 2.8
feed-through terminals for wrap termination sak-series 151 sak 2.5 t pin 1 x 1 r 6/36.5/47.5/67 12 mm/m 2.5/3.5 x 0.6 250 v/8 a/2.5 mm 2 4 kv/3 0.4?.7 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 (q 2?0) 24 300 v/10 a/22?2 awg y cat. no. qty. 0108520000 100 0108560000 1 )100 t ype cat. no. qty. ap (1.5) 0279520000 20 ap (1.5) 0279560000 20 tw (2.5) 0302820000 20 tw (1.5) 0302860000 20 tw (0.5) 0197100000 20 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2 0337000000 50 q 3 0337100000 50 q 4 0337200000 50 q 10 0368700000 20 stb 8.5 ( 2.3) 0280600000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories r 6/36.5/47.5/62 12 mm/m 2.5/3.5 x 0.6 250 v/10 a/2.5 mm 2 4 kv/3 0.4?.7 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 (q 2?0) 24 300 v/10 a/22?2 awg y cat. no. qty. 0485920000 10 0 0478820000 100 t ype cat. no. qty. ap (1.5) 0279520000 20 ap (1.5) 0279560000 20 tw (2.5) 0302820000 20 tw (1.5) 0302860000 20 tw (0.5) 0197100000 20 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2 0337000000 50 q 3 0337100000 50 q 4 0337200000 50 q 10 0368700000 20 stb 8.5 (?2.3) 0280600000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to iec 60 947-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data pin version right krg horizontal right krg v ertical left krg horizontal vertical vertical right krg assembly assembly 2x vertical krg right pa end plate (thickness mm) krg pa partition (thickness mm) krg pa hp hp small partition cross-connection 2-pole 3-pole 4-pole 10-pole t est plug/socket plug-test socket without using ql ps stb marking tags print dek standard r 6/36.5/47.5/69 12 mm/m 2.5/3.5 x 0.6 250 v/10 a/2.5 mm 2 4 kv/3 0.4?.7 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 (q 2?0) 24 300 v/10 a/22?2 awg y cat. no. qty. 0371020000 100 0485020000 100 t ype cat. no. qty. ap (1.5) 0279520000 20 ap (1.5) 0279560000 20 tw (2.5) 0302820000 20 tw (1.5) 0302860000 20 tw (0.5) 0197100000 20 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2** 0337000000 50 q 3** 0337100000 50 q 4** 0337200000 50 q 10** 0368700000 20 stb 8.5 ( 2.3) 0280600000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories ** not for type 2 x vertical mounting rails, end brackets, further marking material see ?ccessories 1 ) shock-proof with adp4 cover profile (see section ?ccessories? y y y sak 2.5 t pin 0.8 x 2.4 sak 2.5 t pin 0.8 x 1.6 din 41 611, part 2 and for spring-clip termination din 41 611, part 4
152 feed-through terminals dimensions wi dth/length/height (mm) with ts 32 y insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 w ith/without plastic insulating collar mm 2 plug gauge according to iec 60 947-1 size continuous current of terminal block for conductor size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data pin type right pa links pa horizontal right pa v ertical right pa v ertical right blue pa v ertical pa v ertical left pa dk 4 qt bridgeable on right pa both levels end plate/partition (thickness mm) pa blue pa small partition tsch 4 cross-connection/covers q 3 qb 4 2-pole 3-pole 4-pole 10-pole 25-pole t est plug/socket plug-test socket without using ql stb ps fw/fs mounting rails, end brackets, further marking material see ?ccessories * the conductor cross-section for the screw connection is reduced to 2.5 mm 2 when qb is used. ** only to be used with pa-version 1 ) shock-proof with adp4 cover profile (see section ?ccessories? y y yy horizontal vertical assembly assembly 6/50/58.5/75.5 9 mm/m 3/3.5 x 0.6 250 v/8 a/4 mm 2 4 kv/3 0.5?.0 1 0.5? 1.5? 0.5? 0.5? a3 (q 2?0) 32 y cat. no. qty. 0536560000 50 1398460000 1 )50 t ype cat. no. qty. ap (1.5) 0359260000 20 ap (dk4 qt) 1397160000 20 ap (1.5) 0359280000 20 tw (2.0) 0607000000 20 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 qb 2* 0482700000 100 qb 3* 0482800000 50 qb 4* 0482900000 50 stb 8.5 ( 2.3) 0215700000 50 ps 2.3 0180400000 20 dekafix 6 see ?ccessories 6/50/60.5/77.5 9 mm/m 3/3.5 x 0.6 250 v/10 a/4 mm 2 4 kv/3 0.5?.0 1 0.5? 1.5? 0.5? 0.5? a3 (q 2?0) 32 y cat. no. qty. 0370460000 1 )50 0370360000 1 ) t ype cat. no. qty. ap (1.5) 0359260000 20 ap (1.5) 0359280000 20 tw (2.0) 0607000000 20 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 qb 2* 0482700000 100 qb 3* 0482800000 50 qb 4* 0482900000 50 stb 8.5 ( 2.3) 0215700000 50 ps 2.3 0180400000 20 dekafix 6 see ?ccessories 6/50/67.5/84.5 9 mm/m 3/3.5 x 0.6 250 v/10 a/4 mm 2 4 kv/3 0.5?.0 1 0.5? 1.5? 0.5? 0.5? a3 (q 2?0) 32 y cat. no. qty. 0527760000 1 )50 t ype cat. no. qty. ap (1.5) 0359260000 20 tw (2.0) 0607000000 20 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 qb 2* 0482700000 100 qb 3* 0482800000 50 qb 4* 0482900000 50 stb 8.5 ( 2.3) 0215700000 50 ps 2.3 0180400000 20 dekafix 6 see ?ccessories 6/42/40.5/54.5 8 mm/m 3/3.5 x 0.6 250 v/6/8 a/4 mm 2 4 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? a3 (qb 2?0) 10 y cat. no. qty. 1 x 1 0587460000 100 0.8 x 2.4 0545060000 100 0.8 x 1.6 0469360000 100 t ype cat. no. qty. ap (1.5) 0211360000 20 tw (2.0) 0607000000 20 qb 2* 0482700000 100 qb 3* 0482800000 50 qb 4* 0482900000 50 qb 25 blank* 0134000000 20 dk 4 t pin 1 x 1 dk 4 t pin 0.8 x 1.6 dk 4 t pin 0.8 x 2.4 sakrt pin 1 x 1/0.8 x 2.4 and 0.8 x 1.6 disconnect terminals for wrap connection acc. to din 41 611, part 2 and for spring-clip connection acc. to din 41 611, part 4
feed-through terminals and disconnect test terminals sak-series 153 r # 6/60/46.5 12 mm/m 2.5/3.5 x 0.6 250 v/20 a/2.5/1.5 mm 2 4 kv/3 0.4?.7 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 (q 2?0) 24 300 v/10 a/22?2 awg y cat. no. qty. 0309120000 100 t ype cat. no. qty. ap (1.5) 0309220000 20 ap (1.5) 0309270000 20 tw (1.5) 0302860000 20 tw (1.0) 0297100000 20 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2 0337000000 50 q 3 0337100000 50 q 4 0337200000 50 q 10 0368700000 20 ad 4 0303400000 50 bsk m 3 x 22 0128900000 100 dek 6 see ?ccessories r # 6/44.5/46.5 6/44.5/40 12 mm/m 2.5/3.5 x 0.6 250 v/20 a/2.5/1.5 mm 2 4 kv/3 0.4?.7 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 (q 2?0) 24 300 v/10 a/22?2 awg y qty. w qty. 0351420000 100 0351470000 100 0351460000 2 )100 0495060000 2 )100 0544120000 *100 0544160000 * 2 )100 t ype cat. no. qty. ap (1.5) 0309220000 20 ap (1.5) 0309270000 20 ap (1.5) 0279560000 20 tw (1.5) 0302860000 20 tw (1.0) 0297100000 20 tw (2.0) 0607000000 20 tsch 1 0319160000 100 q 2 0337000000 50 q 3 0337100000 50 q 4 0337200000 50 q 10 0368700000 20 stb 8.5 ( 2.3) 0280600000 50 stb 29.5 ( 4) 0133400000 50 ps 2.3 0180400000 20 ps 4 0299600000 20 ad 4 0303400000 50 bsk m 3 x 22 0128900000 100 dek 6 see ?ccessories r # 6/55/46.5 6/55/40 250 v/20 a/1.5 mm 2 4 kv/3 (q 2?0) 24 300 v/10 a/26?2 awg y qty. w qty. 0323620000 100 0323670000 100 0323660000 2 )100 0567260000 2 )100 t ype cat. no. qty. ap (1.5) 0309220000 20 ap (1.5) 0309270000 20 ap (1.5) 0279560000 20 tw (1.5) 0302860000 20 tw (1.0) 0297100000 20 tw (2.0) 0607020000 20 tsch 1 0319160000 100 q 2 0337000000 50 q 3 0337100000 50 q 4 0337200000 50 q 10 0368700000 20 stb 8.5 ( 2.3) 0280600000 50 stb 29.5 ( 4) 0133400000 50 ps 2.3 0180400000 20 ps 4 0299600000 20 ad 4 0303400000 50 bsk m 3x 22 0128900000 100 dek 6 see ?ccessories a r # 6.5/50/40.5/54.5 (opened) 6.5/50/38/52 8 mm/m 3/3.5 x 0.6 250 v/10 a/4/1.5 mm 2 4 kv/3 0.5?.0 2/1 0.5? 0.5? 0.5? 0.5? a 3 (qb 2?5) 10 300 v/10 a/22?2 awg 300 v/10 a/22?2 awg y qty. 0412360000 100 0412380000 100 0412460000 * 100 0412480000 * 100 t ype cat. no. qty. ap (1.5) 0211360000 1 )20 ap (1.5) 0211380000 20 tw (2.0) 0607000000 20 qb 2** 0482700000 100 qb 3** 0482800000 50 qb 4** 0482900000 50 qb 25 blank** 0134000000 20 ps 2.3 0180400000 20 dek 6.5 see ?ccessories dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal block for conductor size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data t ype krg blue krg krs pa blue pa krg pa blue pa end plate/partition (thickness mm) ap tw krg blue krg pa blue pa pa hp hp small partition cross-connection q 3 q 4 2-pole 3-pole 4-pole 10-pole 25-pole t est plug/socket plug-test socket without using ql stb plug-test-socket for use with ql ps cover marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories * soldering lug on left-hand side ** the conductor cross-section for the screw connection is reduced to 2.5 mm 2 when qb is used. 1 ) for ts 32 and ts 35 2 ) contact-proof cross-connection with adp 4 cover profile (see ?ccessories? y yy y ww sak 2.5/m.ls w ith screen lug sak 2.5 l sak 2.5 l/35 sakr l sakr l/35 disconnect terminal sak 2.5 ll sak 2.5 ll/35 with solder connection
154 disconnect test terminals with solder connections r # 6.5/58/40.5/54.5 (opened) 250 v/10 a/1.5 mm 2 4 kv/3 300 v/10 a/22?2 awg y qty. 0464460000 100 t ype cat. no. qty. ap (1.5) 0211320000 20 ap (1.5) 0211360000 20 ap (1.5) 0211380000 20 tw (0.5) 0474700000 20 tw (2.0) 0607000000 20 dek 6.5 see ?ccessories 6.5/58/40.5/54.5 (opened) ??3.5 x 0.6 250 v/10 a/1.5 mm 2 4 kv/3 y qty. w qty. 0294260000 100 t ype cat. no. qty. ap (1.5) 0211320000 20 ap (1.5) 0211360000 20 ap (1.5) 0211380000 20 tw (0.5) 0474700000 20 tw (2.0) 0607000000 20 ps 2.3 0180400000 20 dek 6.5 see ?ccessories 6.5/50/40.5/54.5 (opened) 8 mm/m 3/3.5 x 0.6 250 v/10 a/4/1.5 mm 2 4 kv/3 0.5?.0 1 0.5? 1.5? 0.5? 0.5? a 3 (qb 2?5) 10 y qty. w qty. 0518160000 *100 0183560000 100 0572660000 100 t ype cat. no. qty. ap (1.5) 0211360000 20 ap (1.5) 0211380000 20 tw (0.5) 0474700000 20 tw (2.0) 0607000000 20 qb 2** 0482700000 100 qb 3** 0482800000 50 qb 4** 0482900000 50 qb 25 blank** 0134000000 20 ps 2.3 0180400000 20 dek 6.5 see ?ccessories * soldering lug on left-hand side ** the conductor cross-section for the screw connection is reduced to 2.5 mm 2 when qb is used. y w y w y dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46228/1 w ith/without plastic insulating collar mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal block for conductor size continuous current rating of cross-connection 2 pole a continuous current rating of cross-connection multipole a rated data according to ul/csa v oltage/current/conductor size ul v oltage/current/conductor size csa ordering data t ype krg blue krg krs pa blue pa krg krs pa blue pa end plate/partition (thickness mm) ap tw krg blue krg pa blue pa pa hp hp small partition cross-connection qb 3 qb 4 2-pole 3-pole 4-pole 10-pole 25-pole t est plug/socket ps marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories sakr l w ith 2 stb 6 sakr ll sakr ll w ith 2 stb 6
disconnect test terminals with solder connections sak-series 155 4/48/36/50 (opened) 63 v/10 a/1.5 mm 2 1.5 kv/3 y cat. no. qty. 0212060000 100 t ype cat. no. qty. ap (1.5) 0212260000 20 on demand 4/54/36/50 (opened) 63 v/10 a/1.5 mm 2 1.5 kv/3 y cat. no. qty. 0304960000 100 t ype cat. no. qty. ap (1.5) 0212260000 20 on demand 8/40/53 12 mm/m3/3.5 x 0.6 iec 60 947-7-1 800 v/32 a/4 mm 2 0.5? 0.5...6 mm 2 0.5...4 mm 2 a 4 35 a/6 mm 2 36 36 y cat. no. qty. sakk 4 1598080000 50 t ype cat. no. qty. ap/sakk 4/10 9502630000 10 t ype cat. no. qty. ql 2 9509420000 100 ql 3 9509430000 100 ql 4 9509440000 50 ql 10 9509450000 20 vh 13.5 0248500000 100 bs (m 3 x 20) 0303000000 10 0 sst 0152700000 mew 1/32 0445600000 ek 2 0323100000 11.5/40/53 12 mm/m 4/5.5 x 1.0 iec 60 947-7-1 800 v/57 a/10 mm 2 1.2? 2.5...16 mm 2 2.5...10 mm 2 b 6 63 a/16 mm 2 47 36 y cat. no. qty. sakk 10 1598090000 50 t ype cat. no. qty. ap/sakk4/10 9502630000 10 t ype cat. no. qty. ql 2 9509470000 10 0 ql 3 9509480000 50 ql 4 9509490000 50 ql 10 9509500000 20 vh 12.5 9509510000 50 bs (m 3 x 20) 0303000000 10 0 sst 0152700000 mew 1/32 0445600000 ek 2 0323100000 yy dimensions/approvals wi dth/length/height (mm) with ts 32 y wi dth/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data t ightening torque range nm to r que setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46 228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal block for conductor size continuous current rating of cross-connection 2 pole a continuous current rating of cross-connection multipole a rated data according to ul/csa vo ltage/current/conductor size ul vo ltage/current/conductor size csa ordering data t ype krg blue krg krs pa blue pa krg krs pa blue pa ceramic end plate/partition (thickness mm) ap tw krg blue krg pa blue pa pa small partition cross-connection q 3 qb 4 2-pole 3-pole 4-pole 10-pole 25-pole additional accessories marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories tal 2 solder connections tal 4 solder connections sakk 4 sakk 10 ceramic feed-through terminals for use in high temperature ranges up to max. 210 c
156 feed-through terminals for initiators and actuators 1 ) dli 2.5/35/10 = block of 10 with built-in cross-connections * only in upper busbar mounting rails, end brackets, further marking material see ?ccessories w for cross-connections for more than 20 terminals, replace vh with vh 4.2 (134580) without internal thread snap fit, external cross-connec- tion vqb 1.5. dimensions/approvals width/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule according to din 46228/1 mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2?-pole a continuous current rating of cross-connection 6?0-pole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data standard with diode 1n4007 with led red (5?0 v) with led green (5?0 v) with led and diode 1n4007 with led and diode 1n4007 block of 10 1 ) block of 10 1 ) fuse inserts end plate/small partition ap-dli ap-dld part-ap tsch 1 (thickness 1.5 mm) test plug/plug socket stb 8.5 ps cross-connection q 3 vqb group marking wt 4 cover hp 4 marking tags print dek standard w w w a r # 6/65/49 7 mm/m 2.5/3.5 x 0.6 5?0 v-/20 a/2.5 mm 2 0.8 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg w best.-nr . qty. 1578550000 100 1578560000 100 type cat. no. qty. ap 1313260000 20 tsch 1 0319160000 100 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb 1.5/ 50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 1000 sg 10 0332500000 1000 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories a r # 6/65/49 7 mm/m 2.5/3.5 x 0.6 5?0 v-/20 a/2.5 mm 2 0.8 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg w cat. no. qty. 1578510000 100 1578520000 100 (led red) 1578530000 10 (led green) 1578540000 10 type cat. no. qty. ap 1313260000 20 tsch 1 0319160000 100 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb 1.5/ 50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 1000 sg 10 0332500000 1000 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories a r # 6/65/49 7 mm/m 2.5/3.5 x 0.6 250 v/20 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg w cat. no. qty. 1313360000 100 (w/o) 1411360000 10 (with dekafix) 1579070000 10 type cat. no. qty. ap 1313260000 20 tsch 1 0319160000 100 stb 8.5*( 2.3) 0215700000 50 ps 2.3 0180400000 20 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb1.5/50bl 1633280000 5 vqb1.5/50rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 1000 sg 10 0332500000 1000 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories a r # 6/82/49 7 mm/m 2.5/3.5 x 0.6 250 v/24 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 (q 2?0) 20 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg w cat. no. qty. 1317060000 50 type cat. no. qty. ap 1317660000 20 ap (part-ap) 1381860000 20 tsch 1 0319160000 100 stb 8.5*(2 . 3) 0215700000 50 ps 2.3 0180400000 20 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb1.5/50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 1000 sg 10 0332500000 1 000 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories dli 2.5 dli 2.5 ld pnp dli 2.5 ld npn dld 2.5
sak-series 157 feed-through terminals for initiators and actuators ** if the cross-connection runs via the pe connection of the dla, or if a pole is generally skipped, the rated voltage is reduc ed to 30 v~ 2) a4 clamping position = max 4 mm 2 ... 3) a3 clamping position = max 2.5 mm 2 ... ferrule with/without plastic insulating collar w w w dla 2.5 dla 2.5/d dla 2.5/ld dla 2.5/ld/d dld 2.5/pe kdks1 / pe w w w a r q # 6/65/49 7 mm/m 2.5/3.5 x 0.6 5?0 v/17.5 a/2.5 mm 2 0.8 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg 5?0 v/10 a/26?2 awg w cat. no. qty. 1578430000 100 1578440000 100 type cat. no. qty. ap 1313260000 20 tsch 1 0319160000 100 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb 1.5/50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 10 0 0 sg 10 0332500000 10 0 0 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories? a r q # 6/65/49 7 mm/m 2.5/3.5 x 0.6 5?0 v/17.5 a/2.5 mm 2 0.8 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg 5?0 v/10 a/26?2 awg w cat. no. qty. (led red) 1578470000 100 (led green) 1578480000 100 (led red) 1578490000 10 (led green) 1578500000 10 type cat. no. qty. ap 1313260000 20 tsch 1 0319160000 100 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb 1.5/50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 10 0 0 sg 10 0332500000 10 0 0 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories? a r q # 6/65/49 7 mm/m 2.5/3.5 x 0.6 250 v**/17.5 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg w cat. no. qty. 1565970000 100 (w. dekafix) 1578380000 10 (w/o dekafix) 1578390000 10 type cat. no. qty. ap 1313260000 20 tsch 1 0319160000 100 stb8.5*( 2.3) 0215700000 50 ps 2.3 0180400000 20 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb1.5/50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 1 000 sg 10 0332500000 1 000 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories a r q # 6/65/49 7 mm/m 2.5/3.5 x 0.6 250 v**/17.5 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg w cat. no. qty. 1578400000 100 type cat. no. qty. ap 1313260000 20 tsch 1 0319160000 100 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb 1.5/50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 10 0 0 sg 10 0332500000 10 0 0 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories? a r # 6/74.5/49 7 mm/m 2.5/3.5 x 0.6 250 v**/17.5 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 0.5?.5 0.5? 0.5?.5 a 3 20 a/2.5 mm 2 (q 2?0) 20 300 v/10 a/26?2 awg 300 v/10 a/26...12 awg w cat. no. qty. 1595950000 100 type cat. no. qty. ap 1595960000 20 ap (part-ap) 1595970000 tsch 1 0319160000 100 stb 8.5*( 2.3) 0215700000 50 ps 2.3 0180400000 20 q 2 1312500000 50 q 3 1312600000 50 q 4 1312700000 50 q 10 1313100000 20 q 20 1399800000 20 ql 2 0297200000 100 vh 4.2 1345800000 100 vqb 1.5/50 bl 1633280000 5 vqb1.5/50 rt 1633290000 5 vqb1.5/50 sw 1635120000 5 wt 4 1341060000 100 sf 10 0332400000 1 000 sg 10 0332500000 1 000 adp 0485400000 20 hp 4 0485860000 20 dek 6 see ?ccessories? a # 8/91/65 8 mm/m 3 2) /m 2.5 3) /3.5 x 0.6 500 v / 6 . 3 a / 4 mm 2 6 kv/3 0.5? 2) /0 . 4?.7 3) 2/ 1*** 0.5? 0.5? 0.5? a 4 2) /a 3 3) -/-/22...12 awg w cat. no. qty. 9528110000 50 not combine with dli / dla wemid 9532450000 50 5 x 20 without core indicator type cat. no. qty. ap 9503330000 50 ap wemid 9532470000 50 qb 2 0461100000 50 qb 3 0461200000 50 qb 4 0461300000 50 dek 8 see ?ccessories a4 a4 a4 a4 a3
158 feed-through terminals for initiators and motors dimensions/approvals width/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 plug gauge according to 60 947-7-1 size continuous current of terminal for conductor size continuous current rating of cross-connection, multipole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data version pa end plate/partition end plate partial end plate for vli1.5 ?mak2.5 combination partial end plate for vli1.5 ?vli1.5pe combination partial end plate for vli1.5pe ?mak2.5 combination cross-connection vqb 50-pole, snap-fit, external cross-connection qb 25-pole external cross-connection group marking tag carrier for s 10 tags marking tags print dek standard a q # 6/79/64 8 mm/m 2.5/3.5 x 0.6 250 v/17.5 a/1.5 mm 2 4 kv/3 0.4?.6** 1 0.5?.0 0.5?.5 0.5? 0.5?.5 0.5?.5 a3 24 a/2.5 mm 2 24 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg w cat. no. qty. 1633250000 50 type cat. no. qty. ap vli1.5 1633260000 20 teap 2 m ak 2.5 1633330000 20 teap vli1.5 1633270000 20 vqb1.5/50bl* 1633280000 5 vqb1.5/50rt* 1633290000 5 vqb1.5/50sw* 1635120000 5 t 5 0348500000 100 sf 10 0332400000 1000 sg 10 0332500000 1000 dek 5 see ?ccessories a q # 6/69/63 8 mm/m 2.5/3.5 x 0.6 250 v/17.5 a/1.5 mm 2 4 kv/3 0.4?.6 1 0.5?.0 0.5?.5 0.5? 0.5?.5 0.5?.5 a3 24 a/2.5 mm 2 24 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg w cat. no. qty. 1633310000 50 type cat. no. qty. ap vli1.5/pe 1633320000 20 teap vli1.5 1633270000 20 teap 1 mak2.5 1633340000 20 vqb1.5/50bl* 1633280000 5 vqb1.5/50rt* 1633290000 5 vqb1.5/50sw* 1635120000 5 t 5 0348500000 100 sf 10 0332400000 1000 sg 10 0332500000 1000 dek 5 see ?ccessories a r # 6/88/64 8 mm/m 2.5/3.5 x 0.6 500 v (l-l) / 250 v (l-pe) 24 a/2.5 mm 2 6 kv/3 0.4?.6 1 0.5?.0 0.5?.5 1.5? 0.5?.5 0.5?.5 a3 24 a/4 mm 2 24 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg w cat. no. qty. 1615270000 50 1631650000 50 type cat. no. qty. ap mak2.5 1615280000 20 teap 2 mak2.5 1633330000 20 teap1 mak2.5 1633340000 20 vqb1.5/50bl* 1633280000 5 vqb1.5/50rt* 1633290000 5 vqb1.5/50sw* 1635120000 5 qb 25 sw* 0520000000 20 qb 25 rt* 0520060000 20 qb 25 bl* 0520080000 20 t 5 0348500000 100 sf 10 0332400000 1000 sg 10 0332500000 1000 dek 5 see ?ccessories * when using cross-connection bridges, the connected cross-section is reduced by one level ** 0.4?.45 for lower connection level mounting rails, end brackets, further marking material see ?ccessories vli 1.5 vli 1.5pe mak 2.5 w w w
159 sak-series disconnect test terminal against induced high voltage measures to minimize risks of electric vol- tage peaks in control systems of power plants and transforming stations: ?insulation between installation and con- trol cable by pulling disconnect plugs. ?grounding of control cable is possible on an appropriate location of the workplace. ?easy connection of electric isolation of counting, control and communication cir- cuits. electricity supply industry standard esi 12-4 1973 the electricity supply industry standard esi 12-4 1973 defines a detailed specifica- tion of control and protection equipment. the main functions of thiese installations are as follows: ?insulation of the control cables located in front of ground or installation lines with increased potential, which is required to prevent unintentional contact of service staff with live parts. ?separation of control cables from local control circuits. ?application also includes test connec- tions for auxiliary control circuits and / or local control circuits. ?grounding of control cables and / or auxiliary control circuits. ?bundled disconnection of all auxiliary control circuits from potential earth. ?a test voltage can be applied using the screening connection of the control cable, which is normally routed on the enclosure, with the help of an appropria- te separation. this permits to check whether the screening line is correctly functioning. for this test, an insulated feed-through plate is required. esi 12-4: "terminating equipment for pilot cables subject to induced transient voltages exceeding 650 v rms". sakh 6 y 15/138/79 12 mm 15 kv ac (esi 12-4)**/30 a 0.5...10 0.5...10* w cat. no. qty. ppt/35 3835020000 10 incl. disconnect plug and dis- placement tool (if min. 10 items are ordered) ap/ppt (3) 3835120000 10 tst/ppt 3835360000 10 ph/ppt 3835260000 10 the disconnect plug may only be removed with the displace- ment tool. ps (4) 0299600000 20 stb 17 0147100000 50 tsk 35 0514300000 1 dek 5 see ?ccessories 12 mm 1 kv ac / 1.5 kv dc / 47 a >15 kv (from terminal to terminal) 0.5... 6 0.5... 6 w cat. no. qty. sakh 6 0126600000 50 ap 0131700000 20 dek 5 see ?ccessories ppt/35 dimensions/approvals width/length/height (mm) with ts 35 x 7.5 w insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current rated impulse voltage/pollution severity clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 ordering data version ep end plate ep disconnect plug displacement tool pa test plug/socket insulated mounting rail pvc 35 x 1.5 mm marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories * also two push-on tabs are possible ** mounted on an insulated mounting rail
1 ) length: 300 mm * not for terminals made from pa 38.5 a / 6 mm 2 a r # 60/27/30 9 mm/m 3/3.5 x 0.6 500 v/32 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.2?.0 / a 3 32 32 300v/27 a/22?2 awg 300 v/10 a/24?2 awg u ts 15 cat. no. qty. for test adapter 1538260000 100 w.mk./f.test ad. 1489360000 10 ata1,10-pole 1633240000 5 type cat. no. qty. ap (1.5) 0294460000 20 tw (0.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5x14 0266800000 100 ad 4 0303400000 50 bsk m 2.5x18 0303300000 100 adp 4 1 ) 1378160000 10 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories 38.5 a / 6 mm 2 a r # 6/27/30 8 mm/m 3/3.5 x 0.6 400 v/32 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.2?.0 / a 3 32 32 300 v/27a/22?2 awg 300 v/10 a/24?2 awg u ts 15 cat. no. qty. 0294320000 100 0294360000 100 0294380000 100 (10pol./no mk.) 0359560000 10 (1 0pol./w.mk.) 0359660000 10 akz4 wemid 9537110000 100 type cat. no. qty. ap (1.5) 0294420000 20 ap (1.5) 9537910000 20 ap (1.5) 0294460000 20 ap (1.5) 0294480000 20 tw (2.0) 0118900000 20 tw (0.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5x14 0266800000 100 ad 4 0303400000 50 bsk m 2.5x18 0303300000 100 adp 4 1 ) 1378160000 10 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories 160 21.5 a / 2.5 mm 2 a r # 5/25/25 7 mm/m 2.5/3.0 x 0.5 250 v/17.5 a/1.5 mm 2 4 kv/3 0.4?.6 1 0.5?.5 1.5 0.5?.5 0.5?.5 0.5?.5 0.2?.5 / a 1 24 24 150 v/15 a/22?4 awg 300 v/10 a/24?6 awg u ts 15 cat. no. qty. 0340460000 10 0 0340480000 10 0 (10pol./no mk.) 0358060000 10 ( 1 0pol./w.mk.) 0358160000 10 type cat. no. qty. ap (1.5) 0340560000 50 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 5 0660300000 20 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories 26 a / 4 mm 2 a r # 5/25.5/28 7 mm/m 2.5/3.0 x 0.5 250 v/24 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 1.5?.5 0.5? 0.5?.5 0.5?.5 0.13?.0 / a 3 24 24 300 v/10 a/26?2 awg 300 v/10 a/26?2 awg u ts 15 cat. no. qty. (with pin) 0697160000 100 (with pin) 0697180000 100 (without pin) 0175960000 100 akz 2.5 w. ap 0385860000 50 type cat. no. qty. ap (2.5) 0697360000 50 ap (2.5) 0697380000 50 tw (1.5) 0318560000 20 tw (1.5) 0318580000 20 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 5 0660300000 20 q 10 0368500000 20 marking tags can be snapped on via cross-connection stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories max. technical data dimensions/approvals width/length/height (mm) with ts 15 u insulation stripping length/clamping screw/screwdriver blade rated data vde 0611 part 1/8.92/iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage / pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data type krg pa blue pa pa pa end plate (thickness mm) krg wemid pa blue pa partition (thickness mm) krg pa blue pa small partition pa cross-connection q 2 qb 4 switchable cross-connection link vl bs vh cover/profiled material for covers for finger-safety* test plug/socket plug test socket can be used without ql marking tags print dek standard stb ps k sleeve u u u akz 1.5 akz 1.5/10 akz 2.5 akz 4 akz 4/10 akz 4 wemid akz 4 for test adapter akz 4/10 for test adapter feed-through terminals protective conductor terminals fuse terminals disconnect test terminals rail mounting ts 15
sak-series 161 rail mounting ts 15 a r 7/32/34 9 mm/m 3/3.5 x 0.6 iec 60 947-7-2 ??4 mm 2 8 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5?.5 0.5?.5 0.13?.0 / a 3 ??22?2 awg ??26?2 awg u ts 15 cat. no. qty. 0380260000 100 (green/yellow) type cat. no. qty. dek 6.5 see ?ccessories r 7/27.5/30 9 mm/m 3/3.5 x 0.6 ??4 mm 2 0.8?.6 3 0.5? 1.5? 0.5? 0.5? 0.5? 0.5?.0 / a 3 ??22?4 awg u ts 15 cat. no. qty. 0211200000 50 type cat. no. qty. 38.5 a / 6 mm 2 a r 60/32/34 9 mm/m 3/3.5 x 0.6 690 v/32 a/4 mm 2 8 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.2?.0 / a 3 20 20 u ts 15 cat. no. qty. 0489560000 100 (10pol./no mk.) 0366560000 10 (1 0pol./w.mk.) 0469560000 10 type cat. no. qty. bb 3 (8.0) 0366660000 50 combined ap + end brackets tw/ap (1.5) 1331760000 20 tsch 4 0363360000 100 q 2 0369000000 50 q 3 0369100000 50 q 4 0369200000 50 q 10 0369300000 20 ad 4 0303400000 50 bsk m 2.5x18 0303300000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories a r 5/28/27 7 mm/m 2.5/3.0 x 0.5 iec 60 947-7-2 ??2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 1.5?.5 0.5? 0.5?.5 0.5?.5 0.13?.0 / a 3 ??26?2 awg ??26?2 awg u ts 15 cat. no. qty. 1303360000 100 (green/yellow) type cat. no. qty. dek 5 see ?ccessories a r 8/58/34 9 mm/m 3/3.5 x 0.6 500 v/6.3 a*/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5?.5 0.5?.5 0.13?.0 / a 3 (qb 2?) 10 300 v/10 a/22?2 awg 300 v/6.3 a/26?2 awg u ts 15 cat. no. qty. 0376860000 100 5 x 20 without indicator type cat. no. qty. ap (1.5) 0380360000 20 qb 2 1 ) insul. 0461100000 50 qb 3 1 ) insul. 0461200000 50 qb 4 1) insul. 0461300000 50 k sleeve 0553300000 100 dek 6.5 see ?ccessories 3-pole ganging with tag bar schs 2, snapped onto three disconnect levers (cat. no. 0337400000 ) 6.5/42/45 8 mm/m 3/3.5 x 0.6 400 v 2 )/10 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.13?.0 / a 3 (qb 2?) 10 u ts 15 cat. no. qty. with 2 stb 0412860000 100 w. clamp.screw 0412760000 100 type cat. no. qty. ap (1.5) 0211360000 20 qb 2 1 ) insul. 048270 0000 50 qb 3 1 ) insul. 0482800000 50 qb 4 1 ) insul. 0482900000 50 qb 25 1 ) blank 0134000000 20 ps 2.3 0180400000 20 dek 6.5 see ?ccessories 1 ) the conductor cross-section is reduced to max. 2.5 mm 2 when qb is used. 2 ) as disconnect test terminal: rated voltage 250 v * with contact sleeve 19 a u u u u u ak 4 ak 4/10 ake 2.5 ake 4 ake 4 ms ask 1 fuse terminal sakr isolating blade terminal with 2 sockets or with 2 clamping screws
162 a r 6/28.5/30.5 400 v/8 a/2.5/1 mm 2 6 kv/3 tab connec. 6.3 and 2.8 mm 20 20 150 v/10 a/22?2 awg 300 v/10 a/24?2 awg u ts 15 cat. no. qty. 0324560000 100 type cat. no. qty. ap (1.5) 0294460000 20 tw (0.5) 0348260000 50 q 2 0369000000 50 q 3 0369100000 50 q 4 0369200000 50 q 10 0369300000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6 see ?ccessories a r 6/28.5/30.5 400 v/8 a/1 mm 2 6 kv/3 tab connection 2.8 mm 20 20 150 v/10 a/22?2 awg 300 v/10 a/24?2 awg u ts 15 cat. no. qty. 0362460000 100 type cat. no. qty. ap (1.5) 0294460000 20 tw (0.5) 0348260000 50 q 2 0369000000 50 q 3 0369100000 50 q 4 0369200000 50 q 10 0369300000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 dek 6 see ?ccessories a r 6/27/30 9 mm/m 3/3.5 x 0.6 400 v/8 a/4/1 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.2...4/a 3 20 20 150 v/20 a/22?2 awg 300 v/10 a/24?2 awg u ts 15 cat. no. qty. 0324460000 100 type cat. no. qty. ap (1.5) 0294460000 20 tw (0.5) 0348260000 50 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 dek 6 see ?ccessories r 6/27/30 9 mm/m 3/3.5 x 0.6 400 v/8 a/4/1 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.2...4/a 3 20 20 300 v/10 a/24?2 awg u ts 15 cat. no. qty. 0158760000 100 type cat. no. qty. ap (1.5) 0294460000 20 tw (0.5) 0348260000 50 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6 see ?ccessories dimensions/approvals width/length/height (mm) with ts 15 u insulation stripping length/clamping screw/screwdriver blade rated data rated voltage*/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data type krg pa blue pa pa end plate (thickness mm) pa pa blue pa hp hp bb partition (thickness mm) pa hp hp small partition cross-connection switchable cross-connection link vl bs vh test plug/socket stb plug test socket ?2.3 ps cover insulation sleeves marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories? * insulation sleeves are to be used for tab connections to maintain the rated voltage. u u u u akz 4 ss akz 4 ss akz 4 s akz 4 sf tab connection solder connection feed-through terminals for ts 15
sak-series 163 feed-through terminals for ts 15 6.5/32/21 400 v/16 a/1 mm 2 6 kv/3 0.5? 0.5? u ts 15 cat. no. qty. 0137320000 100 type cat. no. qty. ep (1.0) 0164100000 100 ep (1.0 tropi. pr.) 0164500000 100 tw (0.5) 0166800000 50 dek 6.5 see ?ccessories a r 6/44/30 250 v/16 a/1.5 mm 2 4 kv/3 0.5?.5 1.5 0.5?.5 0.2?.5 / - 20 20 300 v/20 a/22?2 awg 300 v/10 a/24?2 awg u ts 15 cat. no. qty. 0346460000 100 type cat. no. qty. ap (1.5) 0294460000 20 tw (0.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5 x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ad 4 0303400000 50 bsk m 2.5x18 0303300000 100 dek 6 see ?ccessories r 5/34.5/25 7 mm / m 2.5 / 3.0 x 0.5 250 v/16 a/1.5 mm 2 4 kv/3 0.4?.7 1 0.5?.5 1.5 0.5?.5 0.5?.5 0.5?.5 0.2?.5 / a 1 24 24 150 v/10 a/24?6 awg u ts 15 cat. no. qty. 0340160000 100 type cat. no. qty. ap (1.5) 0329660000 20 tw (0.5) 0166800000 50 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories a r 6/35.5/30 9 mm / m 3 / 3.5 x 0.6 250 v/16 a/4/1.5 mm 2 4 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.2...4.0 / a 3 20 20 300 v/20 a/22?2 awg 300 v/10 a/24?2 awg u ts 15 cat. no. qty. 0334820000 100 0334860000 100 type cat. no. qty. ap (1.5) 0294420000 20 ap (1.5) 0294460000 20 ap (1.5) 0294480000 20 tw (0.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5 x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ad 4 0303400000 50 bsk m 2.5x18 0303300000 100 dek 6 see ?ccessories uuuu akz 1.5 l akz 4 l al 1 akz 4 ll
164 feed-through terminals for ts 15 a r 5/25/45 0.8 x 1.6 7 mm/m 2.5/3.0 x 0.5 125 v/8 a/1.5 mm 2 2.5 kv/3 0.4?.7 1 0.5?.5 1.5 0.5?.5 0.5?.5 0.5?.5 0.13...2.5 / a1 24 24 300 v/10 a/26?4 awg 300 v/10 a/24?6 awg type cat. no. qty. akz 1.5 t 0442560000 100 akz 1.5 t 0357960000 100 akz 1.5 w 0329460000 100 ap (1.5) 0340560000 50 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories a 5/25/39.5 1 x 1 7 mm/m 2.5/3.0 x 0.5 125 v/8 a/1.5 mm 2 2.5 kv/3 0.4?.7 1 0.5?.5 1.5 0.5?.5 0.5?.5 0.5?.5 0.13...2.5 / a1 24 24 300 v/10 a/26?4 awg type cat. no. qty. akz 1.5 t 0483660000 100 akz 1.5 t 0357860000 100 ap (1.5) 0340560000 50 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories dimensions/approvals width/length/height (mm) with ts 15 u pin size insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data pin versions 0.6 x 0.6 1.0 x 1.0 0.8 x 1.6 horizont. 0.8 x 1.6 vertical mounting, mounting, 0.8 x 2.4 horizontal horizontal vertical 0.8 x 2.4 vertical end plate (thickness mm) pa partition (thickness mm) pa small partition cross-connection 2-pole 3-pole 4-pole 10-pole q 3 switchable cross-connection link vl bs vh test plug/socket stb plug test socket ?2.3 ps marking tags print dek standard * a r 5/28/44 0.8 x 1.6 7 mm/m 2.5/3.0 x 0.5 125 v/8 a/1.5 mm 2 2.5 kv/3 0.4?.7 1 0.5?.5 1.5 0.5?.5 0.5?.5 0.5?.5 0.13...2.5 / a1 24 24 300 v/10 a/26?4 awg 300 v/10 a/24?6 awg type cat. no. qty. akz 1.5 t 0400460000 100 akz 1.5 t 0400360000 100 ap (1.5) 0340560000 50 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories a r 5/26/46.7 0.8 x 1.6 7 mm/m 2.5/3.0 x 0.5 125 v/10 a/2.5 mm 2 2.5 kv/3 0.4?.6 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13...4.0 / a3 24 24 300 v/10 a/26?4 awg 300 v/10 a/26?0 awg type cat. no. qty. akz 2.5 k 0696260000 100 ap (2.5) 0697260000 50 tw (1.5) 0318560000 20 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories? u u u akz 1.5 t akz 1.5 t akz 1.5 t akz 2.5 k solder connection spring-clip connection acc. to din 41611 part 4 wrap connection acc. to din/iec 352 part 1 u * 035786 = 45 mm
sak-series 165 feed-through terminals for ts 15 a r 6/27/48.5 1 x 1 9 mm/m 3/3.5 x 0.6 250 v/10 a/4 mm 2 4 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.13...4.0 / a3 20 20 300 v/10 a/26?4 awg 300 v/10 a/24?2 awg type cat. no. qty. akz 4 t 0445860000 100 ap (1.5) 0294460000 20 tw (1.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5 x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories a r 6/27/50.5 0.8 x 1.6 9 mm/m 3/3.5 x 0.6 250 v/10 a/4 mm 2 4 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.13...4.0 / a3 20 20 300 v/10 a/26?4 awg 300 v/10 a/24?2 awg type cat. no. qty. akz 4 t 0344160000 100 akz 4 t 0344060000 100 ap (1.5) 0294460000 20 tw (1.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5 x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories a r 5/26/46.7 0.8 x 1.6 7 mm/m 2.5/3.0 x 0.5 250 v/8 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13...4.0 / a3 24 24 300 v/10 a/26?4 awg 300 v/10 a/26?0 awg type cat. no. qty. akz 2.5 k 0695460000 100 akz 2.5 k 0695660000 100 ap (2.5) 0697260000 50 tw (1.5) 0318560000 20 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories a r 5/47.5/27 0.8 x 1.6 7 mm/m 2.5/3.0 x 0.5 250 v/8 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13...4.0 / a3 24 24 300 v/10 a/26?4 awg 300 v/10 a/26?0 awg type cat. no. qty. akz 2.5 k 0695960000 100 akz 2.5 k 0696160000 100 ap (2.5) 0697260000 50 tw (1.5) 0318560000 20 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories a r 6/27/57,8 0.8 x 2.4 9 mm/m 3/3.5 x 0.6 250 v/10 a/4 mm 2 4 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.13...4.0 / a3 20 20 300 v/10 a/26?4 awg 300 v/10 a/24?2 awg type cat. no. qty. akz 4 t 0366460000 100 akz 4 t 0461660000 100 ap (1.5) 0294460000 20 tw (1.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5 x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories r 6/27/50.2 0.8 x 1.6 250 v/10 a/2.5 mm 2 4 kv/3 0.5...2.5 / - 20 20 300 v/10 a/24?2 awg type cat. no. qty. akz 4 st 0439260000 100 ap (1.5) 0294460000 20 tw (1.5) 0348260000 50 q 2 0369000000 50 q 3 0369100000 50 q 4 0369200000 50 q 10 0369300000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 6 see ?ccessories u u u u u u akz 2.5 k akz 2.5 k akz 4 t akz 4 t akz 4 t akz 4 st
thermocouple, type j thermocouple acc. to iec 584 (din 43 710) busbar constantan (cuni) iron (fe) weidm?ller? thermocouple terminals are specially designed for transmitting the smallest voltages in temperature measu- ring circuits. special busbars ensure that no false signals occur in the terminal when temperature differences exist in the positi- ve and negative path. this high measuring precision is necessary for, e.g. test beds for aircraft engines, for complicated chemi- cal processes, control systems, etc. busbar material corresponds to thermal and compensating conductors ? lear thermocouple marking 2-pole blocks per thermocouple row width 14 mm, incl. end plate configuration of a temperature mea- suring circuit 1 thermocouple (sensor) 4 reference point 2 thermocouple terminals 5 supply conductors (to and from) 3 compensating conductor 6 measuring device the thermocouple terminals displayed in this measurement circuit are used to ther- mo-electrically transmit thermal e.m.f. of the thermocouple to the reference point and indicating device. thermocouple ter- minals are required for the construction of temperature measuring circuits. 166 feed-through terminals for ts 15 akz 4/tc dimensions width/length/height (mm) with ts 15 u insulation stripping length/clamping screw/screwdriver blade rated data rated voltage/current/cross-section further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 plug gauge acc. to iec 60 947-1 size continuous current of terminal for conductor size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a ordering data version for thermocouples type j fe ?cuni acc. to iec 584 type t cu ?cuni (din 43710) type k nicr ?ni type e nicr ?cuni end plate ap (thickness 1.5 mm) pa partition tw (thickness 0.5 mm) pa marking tags print material v0 14/27/30 9 mm/m 3/3.5 x 0.6 ??4 mm 2 0.5? 2 0.5? 1.5? 0.5? 0.5?.5 0.5?.5 a 3 u ts 15 cat. no. qty. 1627010000 20 on demand 1677130000 20 on demand cat. no. qty. 0294460000 20 0348260000 50 dek 5/6 1789590000 500 mounting rails, end brackets, further marking material see ?ccessories? u for temperature measuring circuits
sak-series 167 multipole terminal blocks dimensions/approvals width/length/height (mm) insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data version 2-pole 3-pole 4-pole 4-pole 6-pole 6-pole 8-pole 8-pole 10-pole 12-pole 12-pole 14-pole 16-pole soldering strip/expansion rivet marking strips printed 1 ... unprinted 80 103 85.5 18.5 8.5 10 a r 86/15/15 5 mm/m 2.5/3.5 x 0.6 125 v/24 a/2.5 mm 2 2.5 kv/3 0.4?.45 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.2?.0 / a 2 300 v/10 a/24?2 awg 300 v/10 a/24?2 awg type cat. no. qty. mk 2/12 pa 0241260000 50 mf 2/12 0241760000 50 sn 0200100000 500 bstb 28/12 0245700000 50 bottom bstb 28/12 0278500000 50 top bsto 28/12 0245600000 50 a r 88.5/13.5/12 6 mm/m 2.5/3.5 x 0.6 125 v/24 a/2.5 mm 2 2.5 kv/3 0.4?.45 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.2?.0 / a 2 150 v/25 a/22?2 awg 300 v/10 a/24?2 awg type cat. no. qty. mk 10/14 pa 0370160000 20 other numbers on request the mk 10/14 can be mounted with glue or with m 3 x 12* screws through the empty terminal point aperture *din en iso 1207 a r 110/15/16.1 5 mm/m 2.5/3.5 x 0.6 400 v/24 a/2.5 mm 2 6 kv/3 0.4?.45 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.2?.0 / a 2 300 v/25 a/22?2 awg 300 v/25 a/22?2 awg type cat. no. qty. mk 3/2 krg 0273820000 100 mk 3/3 krg 0273920000 50 mk 3/4 krg 0274020000 50 mk 3/6 krg 0274220000 50 mk 3/8 krg 0274420000 25 mk 3/10 krg 0274620000 20 mk 3/12 krg 0243520000 20 bstb 28/12 0245900000 50 bstb 28/8 0290200000 50 bstb 28/6 0290000000 50 bstb 28/4 0289800000 50 bsto 28/12 0245800000 50 bsto 28/8 0284700000 50 bsto 28/6 0289500000 50 bsto 28/4 0289300000 50 printed on top on request a r 103/17/16 5 mm/m 2.5/3.5 x 0.6 400 v/24 a/2.5 mm 2 6 kv/3 0.4?.45 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.2?.0 / a 2 150 v/20 a/22?2 awg 150 v/15 a/22?2 awg type cat. no. qty. mk 4/16 krg 0244220000 20 bstb 28/16 0262200000 50 bottom bstb 28/16 0278700000 50 top bsto 28/16 0262100000 50 screw connection mk 10/14 mk 2/12 mk 3/12 mk 4/16
168 multipole terminal blocks 40/18/15.5 5 mm/m 2.5/3.5 x 0.6 500 v/24 a/2.5 mm 2 6 kv/3 0.4?.45 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.2?.0 / a 2 type cat. no. qty. mk 5/2 krg 0243820000 100 cover d2 (for mk 5/2) 0244060000 50 cover a r see table below 8 mm/m 3/4.0 x 0.8 500 v/24 a/2.5 mm 2 6 kv/3 0.5?.7 2 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.2 0.2?.0 / a 2 300 v/20 a/22?2 awg 300 v/25 a/24?2 awg type cat. no. qty. ks 2 krg 2 ) 0134420000 100 ks 4 krg 2 ) 0140320000 50 ks 6 krg 2 ) 0140620000 50 ks 10 krg 2 ) 0141620000 20 cover d2 (for ks 2) 0134500000 100 d4 (for ks 4) 0140500000 50 d6 (for ks 6) 0140800000 50 d1 0 (for ks10) 0141800000 20 marking tag cover dimensions type a b ks 2 42 32 ks 4 66 56 ks 6 90 80 ks 10 138 128 elsb 2 0143200000 50 elsb 4 0143300000 50 elsb 6 0143400000 50 elsb 10 0143500000 50 elso 2 0142800000 50 elso 4 0142900000 50 elso 6 0143000000 50 elso 10 0143100000 50 a r i # see table below 8 mm/m 3/4.0 x 0.8 400 v/32 a/4 mm 2 6 kv/3 0.5?.7 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.33?.0 / a 3 300 v/10 a/22?2 awg 300 v/10 a/22?2 awg type cat. no. qty. bk 2 krg 0624720000 50 bk 3 krg 0624920000 50 bk 4 krg 0625120000 50 bk 6 krg 0625220000 50 bk 12 krg 0625320000 50 dimensions type a b bk 2 20 bk 3 31 11 bk 4 38 18 bk 6 52 32 bk 12 92 72.5 sn 0200100000 500 bstb 28/2 0203600000 50 bstb 28/3 0203800000 50 bstb 28/4 0197300000 50 bstb 28/6 0197500000 50 bstb 28/12 0198800000 50 bsto 28/2 0203500000 50 bsto 28/3 0203700000 50 bsto 28/4 0197200000 50 bsto 28/6 0197400000 50 bsto 28/12 0198700000 50 a r see table below 9 mm/m 4/4.0 x 0.8 690 v/41 a/6 mm 2 8 kv/3 1.2?.0 4 0.5? 1.5? 0.5? 0.5? 0.5? 0.33?.0 / a 3 300 v/30 a/22?0 awg 300 v/40 a/22?0 awg type cat. no. qty. mk 6/2 krg 0620420000 50 mk 6/3 krg 0620320000 50 mk 6/4 krg 0620220000 20 mk 6/6 krg 0620120000 20 dimens. length/attach.dim. type krg mk 6/2 23.5 mk 6/3 36.5 13 mk 6/4 49.5 26 mk 6/6 75.5 52 bstb 17/6 0304600000 50 dimensions/approvals width/length/height (mm) insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data versions 2-pole 3-pole 4-pole 4-pole 6-pole 6-pole 8-pole 8-pole 10-pole 12-pole 12-pole expansion rivet marking strips printed 1 unprinted 1 ) projecting length = 1 mm. to be considered for the last terminal in a row! printed on top on request 2 ) please order cover and marking strips separately. cover d 2 (for mk 5/2) cover d 4 (for ks 4) screw/tab c onnection mk 5/2 ks 2?0 bk 2?2 mk 6/2?/6 mounting rails, end brackets, further marking material see ?ccessories?
max. technical data dimensions/approvals width/length/height (mm) insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage*/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data pa expansion rivet/insulation sleeve ih cover/marking strips sak-series 169 multipole terminal blocks a r see below 8 mm/m 3.5/4.0 x 0.8 400 v*/16 a/4 mm 2 6 kv/3 0.8?.6 3 0.5? 1.5? 0.5? 0.5? 0.5? 0.33...4.0 / a 3 300 v/10 a/22?0 awg type cat. no. qty. sls 2/2 krg 0213420000 100 sls 2/4 krg 0240420000 50 sls 2/4 krg 0480320000 50 slotted ih 2.8 0386060000 100 ih 6.3 0386260000 100 2 ) single tab 3 ) double tab mf 1/6?/12 sls 2/2 sls 2/4 mounting rails, end brackets, further marking material see ?ccessories? * insulation sleeves are to be used for tab connections to maintain the rated voltage. a r see below 400 v*/16 a/2.5/1 mm 2 6 kv/3 300 v/10 a/24?2 awg 300 v/10 a/22?0 awg type cat. no. qty. mf 1/6 krg 2 ) 0479720000 100 mf 1/6 krg 3 ) 0480020000 100 mf 1/8 krg 2 ) 0479820000 50 mf 1/8 krg 3 ) 0480120000 50 mf 1/12 krg 2 ) 0479920000 50 mf1/12 krg 3 ) 0480220000 50 dimensions type a b c d mf 1/6 52 34 9.5 6.5 mf 1/8 68 50 9.5 6.5 mf 1/12 113 +0.5 102 8 7.5 ih 2.8 0386060000 100 ih 6.3 0386260000 100 sn 0200100000 500 bstb 10/6 0240900000 50 bstb 10/8 0241100000 50 bstb 10/12 0209500000 50 bsto 10/6 0240800000 50 bsto 10/8 0241000000 50 bsto 10/12 0209400000 100
170 mkl 2/12 mf 2/12 mkl 3/12 mkl 4/16 dimensions/approvals width/length/height (mm) insulation stripping length/clamping screw/screwdriver blade rated data rated voltage*/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data versions horizontal 2-pole other number of poles on demand 4-pole 6-pole 12-pole 16-pole vertical 2-pole other number of poles on demand 4-pole 6-pole 12-pole 16-pole double-sided 2. 8x0.8 single-sided 0.8 x 1.6/2. 8x0.8 expansion rivet/insulation sleeve ih marking strips printed 1 unprinted 0241860000 0241760000 0243620000 0249920000 0262020000 0244320000 mounting rails, end brackets, further marking material see ?ccessories? * insulation sleeves are to be used for tab connections to maintain the rated voltage. 1 ) rated voltage 250 v screw, solder, tab connection a r 103/24/16.5 5mm/m 2.5/3.5 x 0.6 400 v/20 a/2.5/1.5/1 mm 2 6 kv/3 0.4?.45 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.33...4.0 / a 2 300 v/25 a/22?2 awg 150 v/15 a/22?2 awg type cat. no. qty. mk l4 /1 6 krg 0262020000 1 )20 mkl 4/1 6 krg 0244320000 20 bstb 28/16 0262200000 50 bottom top bsto 28/16 0262100000 50 a r 110/23/16 5mm/m 2.5/3.5 x 0.6 400 v* / 20 a / 2.5/ 1.5/ 1 mm 2 6 kv/3 0.4?.45 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.33...4.0 / a 2 300 v/25 a/22?2 awg 300 v/25 a/22?2 awg type cat.no. qty. mkl 3/2 krg 0274920000** 10 0 mkl 3/4 krg 0275120000** 10 0 mkl 3/6 krg 0275320000** 50 mkl 3/12 krg 0243620000** 20 mkl 3/2 krg 0276020000* 10 0 mkl 3/6 krg 0276420000* 50 mkl 3/12 krg 0249920000* 20 * for terminals directly moun- ted next to each other, the rated voltage is reduced to 250 v. ** rated voltage 250 v. for terminals directly mounted next to each other, the rated voltage is reduced to 125 v. bstb 28/4 0289800000 50 bstb 28/6 0290000000 50 bstb 28/12 0245900000 50 bsto 28/4 0289300000 50 bsto 28/6 0289500000 50 bsto 28/12 0245800000 50 75/24/6 5 mm 63 v/17.5 a/1.5/1 mm 2 1.5 kv/3 type cat. no. qty. mf 2/12 pa 0241860000 50 mf 2/12 pa 0241760000 50 ih 2.8 0386060000 100 88/23/15 5 mm/m 2.5/3.5 x 0.6 125 v/20 a/2.5/1.5/1 mm 2 2.5 kv/3 0.4?.45 1 0.5?.5 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.2...2.5 / a 2 type cat. no. qty. mkl 2/12 pa 0241360000 50 sn 0200100000 500 bstb 28/12 0245700000 50 bottom top 0278500000 50 bsto 28/12 0245600000 50 multipole terminal blocks
sak-series 171 akb 4 a r 8/58/30.5 9 mm/m 3/3.5 x 0.6 500 v/6.3 a*/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5?.5 0.5?.5 0.13...4.0 / a3 (qb 2?) 10 300 v/10 a/22?2 awg 300 v/6.3 a/26?2 awg type cat. no. qty. ask 1 pa 0376960000 100 (for g fuse inserts 5x 20 without indicator) ap (1.5) 0380360000 20 qb 2 1 ) 0461100000 50 qb 3 1 ) 0461200000 50 qb 4 1 ) 0461300000 50 k sleeve 0553300000 100 dek 6.5 see ?ccessories 1 ) the conductor cross-section is reduced to max. 2.5 mm 2 when qb is used. * with contact sleeve 19 a k sleeve max. technical data dimensions/approvals width/length/height (mm) insulation stripping length/clamping screw/screwdriver blade rated data according to iec 60 947-7-1 rated voltage/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data pa blue pa end plate/attachment bracket (thickness mm) ap pa blue pa partition (thickness mm) small partition cross-connection q 3 qb 4 switchable cross-connection link vl bs vh test plug/socket ps stb cover/contact sleeve marking tags print dek standard 32 a / 4 mm 2 a r 6/27/23 9 mm/m 3/3.5 x 0.6 400 v/32 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5? 0.5? 0.33...4.0 / a3 32 32 300/250 v/27 a/22?2 awg 300 v/10 a/22?2 awg type cat. no. qty. akb 4 pa 0321560000 100 0321580000 10 0 direct mounting with bb 1 please order separately bb 1 (7) 0320560000 50 bs m 3 x 15 0359000000 100 tw pa (0.5) 0348260000 50 tsch 4 0363360000 100 q 2 0336400000 50 q 3 0336500000 50 q 4 0336600000 50 q 10 0368600000 20 vl 2 0446700000 50 vh 10 0446600000 50 bs m 2.5 x 14 0266800000 100 stb 8.5 0215700000 50 ps 2.3 0180400000 20 ad 4 0303400000 50 bsk m 2.5x18 0303300000 10 0 dek 6 see ?ccessories 26 a / 2.5 mm 2 a r 5/25.5/26.5 7 mm/m 2.5/3 x 0.5 250 v/24 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5? 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13...4.0 / a3 24 24 300 v/10 a/22?2 awg 300 v/10 a/26?0 awg type cat. no. qty. akz 2.5 0697160000 100 akz 2.5 0697180000 100 direct mounting with bb 4 please order separately bb 4 (7.5) 0697560000 50 ap (2.5) 0697360000 50 ap (2.5) 0697380000 50 q 2 0368200000 50 q 3 0368300000 50 q 4 0368400000 50 q 10 0368500000 20 stb 8.5 0215700000 50 ps 2.3 0180400000 20 dek 5 see ?ccessories mounting rails, end brackets, further marking material see ?ccessories for fixing the screws of ask 1 please use m 3 x ... din en. iso 1207 or m 3 x ... din en, iso 1580 screw, solder, tab connection modular design akz 2.5 ask 1 multipole terminal blocks
172 a r 6/20/31 7,8 9 mm/m 2.5/3.5 x 0.6 400 v/20 a/2.5/1.5 mm 2 6 kv/3 0.4 1 0.5?.5 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13...2.5 / a2 10 300 v/20 a/26?2 awg 300 v/10 a/24?2 awg cat. no. 1.5 qty. 0300720000 100 type cat. no. qty. ap (3) 0162520000 100 zp (1.5) 0240720000 50 zp (2.5) 0288520000 20 sst 1.2 0306600000 dek 6 see ?ccessories a r 6/22/36.5 8,4 9 mm/m 3.5/3.5 x 0.6 400 v/16 a/4/1.5 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5?.5 0.5?.5 0.13...2.5 / a3 10 300 v/10 a/26?2 awg 300 v/15 a/26?2 awg 1.5 qty. 2.5 qty. 0303860000 100 0301060000 100 type cat. no. qty. ap (3) 0476260000 50 tw (0.5) 0442300000 50 ps 2.3 0180400000 20 sst 1.2 0306600000 ih 2.8 0386060000 100 dek 6 see ?ccessories a r 6/22/36.5 8.5/7.5 11 mm/m 2.5/3.5 x 0.6 400 v/20 a/2.5/1.5 mm 2 6 kv/3 0.4?.6 1 0.5?.5 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13...2.5 / a2 300 v/20 a/26?4 awg 300 v/15 a/22?4 awg 1.5 qty. 2.5 qty. 0476060000 100 0478660000 100 type cat. no. qty. ap (3) 0476260000 50 ap (3) 0360000000 20 tw (0.5) 0442300000 50 sst 1.2 0306600000 ih 2.8 0386060000 100 dek 6 see ?ccessories a r 6/22/36.5 8,4 400 v/16 a/2.5/1.5/1 mm 2 6 kv/3 0.5...2.5 / - 300 v/18 a/12 awg max. 300 v/3 a/ 1.5 qty. 2.5 qty. 0476160000 100 0478560000 100 type cat. no. qty. ap (3) 0476260000 50 tw (0.5) 0442300000 50 sst 1.2 030660 ih 2.8 0386060000 100 ih 6.3 0386260000 100 dek 6 see ?ccessories dimensions/approvals width/length/height with pins (mm) length solder tag/pin (mm) insulation stripping length/clamping screw/screwdriver blade rated data rated voltage*/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 max. clamping range in mm 2 /plug gauge acc. to iec 60 947-1 size continuous current rating of cross-connection 2-pole a continuous current rating of cross-connection multipole a rated data according to ul/csa voltage/current/conductor size ul voltage/current/conductor size csa ordering data version for plate thickn. mm pa krg pin 1.0x1.0 pin 0.8x1.6 fs 1x6.3 slotted/0.8x2.8 12-pole pa end plate (thickness mm) krg pa ep spacer (thickness mm) krg krg partition (thickness mm) tw test plug/socket stb plug test socket ?2.3 ps fuse pin/insulation sleeve/expansion rivet ih marking tags print dek standard mounting rails, end brackets, further marking material see ?ccessories? * insulation sleeves are to be used for tab connections to maintain the rated voltage. aka 2.5 adk 1 adk 1 f adk 3 f adk 1 s screw connection solder connection tab connection spring-clip connection acc. to din 41 611 part 4 wrap connection acc. to din/iec 352 part 1 feed-through terminals
sak-series 173 r 6/22/52 24 11 mm/m 2.5/3.5 x 0.6 250 v/10 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5?.5 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.33...2.5 / a2 300 v/3 a/22?4 awg cat. no. 1.5 qty. 0176960000 10 0 type cat. no. qty. ap (3) 0476260000 50 tw (0.5) 0442300000 50 sst 1.2 0306600000 dek 6 see ?ccessories a r 86/15/23 8 5 63 v/20 a/2.5/1.5 mm 2 1.5 kv/3 0.4?.45 1 0.5?.5 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.2...2.5 / a2 300 v/10 a/24?2 awg 300 v/10 a/24?2 awg cat. no. qty. 0241460000 50 type cat. no. qty. sn 0200100000 500 bstb 28/12 024570 50 bsto 28/12 024560 50 0109160000 solder tag adk 1 t akz 2.5 k adk 1 ft mk 2/12 feed-through terminals a r 6/22/50.5 19.5?1.9 9 mm/m 3/3.5 x 0.6 400 v/8 a/4 mm 2 6 kv/3 0.5?.0 2 0.5? 1.5? 0.5? 0.5?.5 0.5?.5 0.13...4.0 / a3 10 300/250 v/10 a/26?2 awg 300 v/15 a/26?2 awg 1.5 qty. 2.5 qty. 0372260000 100 0366360000 100 type cat. no. qty. ap (3) 0476260000 50 tw (0.5) 0442300000 50 ps 2.3 0180400000 20 sst 1.2 0306600000 dek 6 see ?ccessories a r 5/26/45.5 22.4?3.6 7 mm/m 2.5/3.0 x 0.5 250 v/8 a/2.5 mm 2 4 kv/3 0.4?.6 1 0.5?.5 1.5?.5 0.5?.5 0.5?.5 0.5?.5 0.13...2.5 / a2 10 300/250 v/10 a/22?2 awg 300 v/10 a/26?0 awg cat. no. qty. 0109160000 solder tag 100 0108960000 100 type cat. no. qty. ap (3) 0697260000 50 tw (1.5) 0318560000 20 ps 2.3 0180400000 20 stb 8.5 0215700000 50 ih 2.8 0386060000 10 0 dek 5 see ?ccessories
174 sp 90 ff 2) sp 90 lf 3) 40/45.5/228.5/110 217/90 400* v/16 a/2.5/1.5 mm 2 6 kv/3 type cat. no. qty. sp 90 ff** 0248120000 1 sp 90 ff** 0608920000 1 sp 90 lf** 0248220000 1 printed: ** a ...f / 1...15 type cat. no. qty. ih 2.8 0386060000 100 ih 6.3 0386260000 100 top 1.5 f/32 sp 10 ff 2) sp 10 lf 3) sp 60 ff 2) sp 60 lf 3) 40.2/110.6/29.5 101.6/20.3 10 mm/m 2.5/3.5 x 0.6 250* v/6 a/1.5/1 mm 2 4 kv/3 0.4?.7 1 0.5?.5 1.5 0.5?.5 0.5?.5 0.5?.5 a1 type cat. no. qty. top 1.5 f/32 0443160000 1) 5 type cat. no. qty. ih 2.8 0386060000 100 42/46.5/170/28 147 1000* v/16 a/2.5/1.5 mm 2 6 kv/3 type cat. no. qty. sp 10 ff 0456220000 10 type cat. no. qty. ih 2.8 0386060000 100 ih 6.3 0386260000 100 fw 5 see ?ccessories 40/45.5/162.5/110 151/90 400* v/16 a/2.5/1.5 mm 2 6 kv/3 type cat. no. qty. sp 60 ff 4) 0340320000 1 sp 60 ff 4) 0340370000 1 sp 60 lf 4) 0343720000 1 sp 60 lf 4) 0343770000 1 sp 60 lf 5) 0124520000 1 sp 60 lf 5) 0124570000 1 printed: 4) a...f / 1...10 5) 00...50 / 1...10 type cat. no. qty. ih 2.8 0386060000 100 ih 6.3 0386260000 100 dimensions width/length/height (mm) hole spacing/mounting dimensions mm insulation stripping length/clamping screw/screwdriver blade rated data rated voltage*/current/cross-section rated impulse voltage vde 0110/1.89/pollution severity further technical data tightening torque range nm torque setting with electric screwdriver type dms 2 clampable conductor solid h07v-u mm 2 stranded h07v-r mm 2 flexible h07v-k mm 2 flexible h07v-k and ferrule din 46 228/1 mm 2 flexible h07v-k and ferrule with plastic insul. collar mm 2 plug gauge acc. to iec 60 947-1 size ordering data version pin 1.0 x 1.0 pa pin 0.8 x 2.8 (push-on), unprinted pa pin 0.8 x 2.8 (push-on), printed, 1?2 pa pin 0.8 x 2.8 (push-on), printed, 1?2, blue pa 6 x plug (6.3 x 0.8) krg 6 x plug (6.3 x 0.8), blue krg 6 x plug (6.3 x 0.8), bzw. 12 x 2.8 x 0.8 slotted krg 6 x plug (6.3 x 0.8), bzw. 12 x 2.8 x 0.8 slotted, blue krg 3 x plug (6. 3x0.8)/1 x solder per pole krg 3 x plug (6. 3x0.8)/1 x solder per pole, blue krg 3 x plug (6.3 x 0.8 bzw. 6 x 2.8 x 0.8)/1 x solder krg 3 x plug (6.3 x 0.8 bzw. 6 x 2.8 x 0.8)/1 x solder, blue krg 2 x direct connection, 1 x pin 0.8 x 1.6 pa insulation sleeves marking tags print dekafix for group markers 1 ) rated voltage 125 v mounting rails, end brackets, further marking material see ?ccessories * insulation sleeves are to be used for tab connections to main- tain the rated voltage. 2 ) ff = tab- tab 3 )l f= solder - tab rack-mounted interface systems
sak-series 175 125 v/? type cat. no. qty. 0468860000 1 0468960000 1 type cat. no. qty. dsa 1 0576060000 50 125 v/? type cat. no. qty. 0467160000 1 0467260000 1 type cat. no. qty. dsa 1 0576060000 50 105 v/? type cat. no. qty. 0498960000 1 0499060000 1 with shield pins type cat. no. qty. dsa 1 0576060000 50 125 v/? type cat. no. qty. 0444060000 1 0545960000 1 with shield pins type cat. no. qty. dsa 1 0576060000 50 size a size b type in mm in mm rv 8/8 k 81 40.64 rv 8/9 k 89 40.64 rv 8/8 l 93 40.64 rv 8/9 l 100 40.64 rv 8/20 k 187,62/31.5 63 rv 8/56 k 460/31.5 63 (k = short/l = long) cat. no. rv a b c 0468860000 8/8 l 26 20 200 0468960000 8/8 l 26 26 206 0467160000 8/8 k 26 20 84 0467260000 8/8 k 26 26 89 0119360000 8/20 k 26 20 84 0544460000 8/20 k 26 26 89 0462260000 8/56 k 26 20 84 0533060000 8/56 k 26 26 89 mounting rails, end brackets, further marking material see ?ccessories technical data acc. to vde pin versions (intern) 0.8 x 2.4/1 x 1 0.8 x 2.4/0.8 x 2.4 plug adapter 1-pole for connection of solid and flexible conductors from 0.75 to 1.5 mm 2 directly on to the pins of the interface system. rv 8/20 short rv 8/56 short 125 v~/? cat. no. qty. 0544460000 1 125 v~/? cat. no. qty. 0462260000 1 0533060000 4 technical data acc. to vde pin versions (internal) 0.8 x 2.4/1 x 1 0.8 x 2.4/0.8 x 2.4 additional versions on request rv 8/8 short rv 8/9 short rv 8/9 long rack-mounted interface systems rv 8/8 long

▲Up To Search▲

Price & Availability of 0206160000

	To Download 0206160000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .